Select Page

DCEC QSM11-C340 Industrial Engine

XCEC QSM11-C340 Industrial engine is a 6-cylinders in line, 10.8 liter four-strokes engine with 125mm bore and 147mm stroke. Equipped with Electrically Control High-pressure Common Rail, engine comes with turbocharger and Air- Air Intercooler.

The prime power at 1800RPM of XCEC QSM11-C340 Industrial engine is 340HP.

As part of EMAC, ConeMac provides industrial power pack solution that integrated with air intake, air exhaust, cooling system, control system, transmission and hydraulic accessories, We also supplying special products such as explosion proof engine, generator and water pump set, as well as ultra-low temperature condition engine power pack.

We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

Advantages of DCEC QSM11-C340 Industrial Engine

  • Electronic control technology effectively solves the problems of engine running, loading and turning, white smoke, etc.; at the same time, the three-stage fuel filter is used to better protect the engine fuel system, and systematically improve the reliability and durability of the engine.

  • The integrated design of “one piece with multiple functions” makes the number of parts and components less than about 25% less than that of the same type of engine, fewer connections, and higher engine reliability. The main bearing area is about 30% than that of the same type of engine, which can guarantee the engineering The machine still has a long working life under high-load working conditions.

  • Compared with the same type of engine, the torque reserve coefficient is larger and the power is stronger, which can meet various complex working conditions.

  • Turbocharger with wastegate valve, effectively improving engine power reserve and transient response.

  • Better environmental adaptability After a large number of severe environmental tests such as plateaus, high heat, high humidity, and extreme cold, it can easily cope with various extreme working conditions.

Technical Specifications

Engine Model:QSM11-C340
Engine Type:6 Cylinders, in Line
Displacement:10.8 L
Rated Speed:1800 RPM
Rated Power:340 HP @ 1800 RPM
Peak Torque:1708 N.m @ 1400 RPM
Fuel System:Celect Electronic
Aspiration Method:Turbocharged & Air-Air Intercooler
Emission Standard:Euro stage III
Bore*Storke:N/A
Packing Size(L*W*H):N/A
Weight , Net Dry:N/A
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C
 

Engine Model

Engine Speed

Output Power

Torque

Compression Ratio

Fuel System

QSM11-C2902100 RPM216 kW983 N.m16.3:1Celect Electronic
QSM11-C3002100 RPM224 kW1017 N.m16.3:1Celect Electronic
QSM11-C3152100 RPM235 kW1068 N.m16.3:1Celect Electronic
QSM11-C3352100 RPM250 kW1036 N.m16.3:1Celect Electronic
QSM11-C3401800 RPM254 kW1345 N.m16.3:1Celect Electronic
QSM11-C350A2100 RPM261 kW1186 N.m16.3:1Celect Electronic
QSM11-C350B2000 RPM261 kW1246 N.m16.3:1Celect Electronic
QSM11-C360A1800 RPM268 kW1424 N.m16.3:1Celect Electronic
QSM11-C360B2100 RPM268 kW1220 N.m16.3:1Celect Electronic
QSM11-C3752100 RPM280 kW1272 N.m16.3:1Celect Electronic
QSM11-C4002100 RPM298 kW1356 N.m16.3:1Celect Electronic
——END——

 

General Infomation of XCEX QSM11-C340 Industrial Engine

Engine ModelQSM11-C340Emission StandardEuro III
Curve&DatasheetFR20023Displacement10.8 L
Compression Ratio16.3:1Packing Size(L*W*H)N/A
No. Of Cylinders6 Cylinders, in LineWet WeightN/A
Fuel SystemCelect ElectronicCPL Code Revision8546
AspirationTurbocharged & Air-Air IntercoolerConfigurationD353014CX03
Rated Power340 HP @ 1800 RPMPeak Torque1708 N.m @ 1400 RPM

Performance Data of XCEX QSM11-C340 Industrial Engine

Max. Low Idle Speed1200 RPM
Min. Low Idle Speed600 RPM
Min. Engine Speed for Full Load Sustained Operation1600 RPM

Noise Emissions Data of XCEX QSM11-C340 Industrial Engine

Estimated Free Field Sound Pressure Level At 15 M (50 Ft.) And Full-Load Governed Speed(Excludes Noise From Intake, Exhaust, Cooling System And Driven Components)—Top101.5 dBa
Estimated Free Field Sound Pressure Level At 15 M (50 Ft.) And Full-Load Governed Speed(Excludes Noise From Intake, Exhaust, Cooling System And Driven Components)—Right Side103.8 dBa
Estimated Free Field Sound Pressure Level At 15 M (50 Ft.) And Full-Load Governed Speed(Excludes Noise From Intake, Exhaust, Cooling System And Driven Components)—Left Side104.5dBa
Estimated Free Field Sound Pressure Level At 15 M (50 Ft.) And Full-Load Governed Speed(Excludes Noise From Intake, Exhaust, Cooling System And Driven Components)—Front105.0 dBa
Estimated Free Field Sound Pressure Level At 15 M (50 Ft.) And Full-Load Governed Speed(Excludes Noise From Intake, Exhaust, Cooling System And Driven Components)—Rear115.5dBa
——END——

 

Performance Data Rated Power of XCEX QSM11-C340 Industrial Engine

Rated PowerTorque Peak
Engine Speed1800 RPM1400 RPM
Output Power340 HP,254 kW314 HP,234 kW
Torque992 lb-ft,1,345 N.m1,260 lb-ft,1,780 N.m
Friction Horsepower45 HP,33 kW28 HP,21 kW
Intake Manifold Pressure51 in-Hg,174 kPa51 in-Hg,171 kPa
Turbo Comp. Outlet Pressure54 in-Hg,183 kPa52 in-Hg,176 kPa
Turbo Comp. Outlet Temperature329 deg F,165 deg C339 deg F,171 deg C
Inlet Air Flow841 ft3/min,397 L/s670 ft3/min,316 L/s
Charge Air Flow62 lb/min,28 kg/min49 lb/min,22 kg/min
Exhaust Gas Flow2,243 ft3/min,1,059 L/s1,915 ft3/min,904 L/s
Exhaust Gas Temperature988 deg F,531 deg C1,098 deg F,592 deg C
Max. Fuel Flow to Pump360 lb/hr,163 kg/hr250 lb/hr,113 kg/hr
Heat Rejection to Coolant5,546 BTU/min,97.52 kW5,763 BTU/min,101.34 kW
Heat Rejection to Fuel233 BTU/min,4.1 kW232 BTU/min,4.08 kW
Heat Rejection to Ambient1,372 BTU/min,24.13 kW1,317 BTU/min,23.16 kW
Heat Rejection to Exhaust14,430 BTU/min,253.74 kW13,600 BTU/min,239.15 kW
Steady State Smoke0.2 Bosch0.2 Bosch

 

System Technical Data of XCEX QSM11-C340 Industrial Engine

Intake Air SystemMax. Allowable Air Temperature Rise Over Ambient At Intake Manifold
(Naturally Aspirated Engines) Or Turbo Compressor Inlet (Turbo-Charged Engines)
30 °F , 16.7
Charge Air Cooling SystemMax. Intake Manifold Temperature At 25 Deg C (77 F) Ambient140 deg F , 60 deg C
Max. Allowable Pressure Drop Across Charge Air Cooler And OEM CAC Piping (Impd)3 in-Hg /10 kPa
Max. Intake Manifold Temperature Differential (Ambient To Imt) (Imtd)63 deg F , 35
Intake Manifold Temperature For Fan-On140 deg F , 60 deg C
Max. Coolant Temperature For Engine Protection Controls218 deg F , 103 deg C
Max. Coolant Operating Temperature At Engine Outlet (Max. Top Tank Temp)215 deg F , 102 deg C
Exhaust SystemMax. Exhaust Back Pressure:3 in-Hg / 10.1 kPa
Recommended Exhaust Piping Size (Inner Diameter)5 in-Hg / 127 mm
Lubrication SystemNominal Operating Oil Pressure – Min. Low Idle15 psi , 103 kPa
Nominal Operating Oil Pressure – Max. Rated Speed35 psi , 241 kPa
Min. Engine Oil Pressure For Engine Protection Devices – Min. Low Idle10 psi , 69 kPa
Fuel SystemMax. Heat Rejection To Return Fuel At Max. Coolant And Inlet Fuel Temperature235 BTU/min , 4.13 kW
Max. Heat Rejection To Return Fuel At Max. Coolant And Inlet Fuel Temperature – Fuel Return Flow Rate Of572 lb/hr , 259 kg/hr
Max. Heat Rejection To Return Fuel At Max. Coolant And Inlet Fuel Temperature – Fuel Return Temperature Prior To Cooler212 deg F , 100 deg C
Max. Supply Fuel Flow591 lb/hr , 268 kg/hr
Max. Return Fuel Flow572 lb/hr , 259 kg/hr
Max. Fuel Inlet Pressure10 psi , 69 kPa
Cold Starting SystemUnaided Cold Start – Min. Cranking Speed110 RPM
Unaided Cold Start – Min. Ambient Temperature For Unaided Cold Start10 deg F , -12.2 deg C
Unaided Cold Start – Cranking Torque At Min. Unaided Cold Start Temperature215 lb-ft , 292 N.m
Aided Cold Start – Min. Ambient Temperature With Grid Heater Only-10 deg F , -23 deg C
Aided Cold Start – Min. Ambient Temperature With Ether Only-10 deg F , -23 deg C
Aided Cold Start – Min. Ambient Temperature With Coolant And Lube Heater Only0 deg F , -18 deg C
Cold Starting Aids AvailableEther, Intake Manifold Heater, Block Heater,                  Oil Pan Heater
——END——

 

Scopes of Supply of XCEX QSM11-C340 Industrial Engine

Cooling System1. Water Pump        Exhuast System1. Exhuast Manifold
2. Engine Fan2. Turbocharger
3. Standard Radiator3. Exhuast Elbow
Starting System1. Starter Motor        Fuel System1. Common Rail Fuel System
2. Starter Rely2. Fuel Filter
Lubricating System1. Oil Pump        Power Output System1. Flywheel
2. Oil Filter2. Standard Flywheel Housing
Air Intake System1. Air Intake Manifold        Charging System1. Charging Alternator
Engine Mounting System1. Engine Mouting Bracket        Engine Auiliary Accessories1. Air Compressor
Control System1. Ecu & Sensors        
——END——

Optional Accessories of XCEX QSM11-C340 Industrial Engine

Air Intake System1. Air Intake Pre-Heater        Exhuast System1. Muffler & Bellows
2. Air Intake Shut-Off Valve2. Flame Trap
3. Air Filter3. Spark Arrestor Type Muffler & Bellows
4. Air Intake Pre-Filter 4. Dpf System
5. Air Filter Alarm System5. N/A
Engine Auiliary Accessories1. Hydraulic Oil PumpControl System1. Can Add Engine Monitoring System, Contro System With Wiring Harness
2. Air Conditioner Compressor2. Can Add Self-Protection System That Integrated with Alarm System
Starting System1. Manual Magnetic Dc ContactorCooling System1. Silent Type Radiator
2. Dual Ears Flywheel Housing2. Plateau Radiator
3. Spring Starter Motor3. Salt-Spray Resistant Radiator
4. Air Starter Motor4. Coolant Pre-Heater
5. Hydraulic Starter Motor5. Jacket Water Heater
6. Remote Starting Function6. N/A
7. Lock Protection Function Of Starter Motor7. N/A
8. Manual Magnetic Dc Contactor8. N/A
Fuel System1. Coarse FilterLubricating System1. Oil Pre-Heater
Power Output System1. ClutchEngine Mounting System1. Shock Absorber Pad
——END——

Committed to Providing Stable and Reliable Premiem Power System for Global Construction Machinery Manufacturer Partners, ConeMac is A Sub-Brand of the EMAC Group that Focuses on Construction Equipment Application.
ConeMac’s Ranges of Products Mainly Inclduing Marine Construction Engines Power Pack, Construction Equipment Gearbox, Gear Reducer, Explosion-Proof Engines, Generator Set and Water Pump Set for Mining, Oil and Gas Field.
For More Information of Our Industrial Power System Products, You Are Welcome to Visit ConeMac Homepage: Conemac.cn

 

Modifiable components of XCEX QSM11-C340 Industrial Engine

Exhuast System        Charging System1. 12V Charging Alternator For 12V Electric System
1. Can Modify Installation Position And Direction Of Turbocharger2. Explosion-Proof Charging Alternator
2. Water-Cooled Turbocharger3. Upgrading To Specified Brand And Speicifications Of Charging Alternator
Power Output System1. Can Modify Size Of Flywheel Housing And FlywheelLubricating System1. Oil Pan Position
2. Dual-Ear Flywheel Housing (For Twin-Starter System)2. Number Of Dipstick
3. Some Of Models Can Modify Flywheel Housing Into Pto Integrated Type3. Position Of Dipstick Can Choose From 6 Positions
4. Engine Have Connecting Port Of Ptos, That Able To Provide Power Output4. Can Modify Oil Filter To Be Remote Installation
Cooling System1. Can Modify Engine Fan Into Blower Fan Or Suction FanEngine Auiliary Accessories1. All Of Auxiliary System Can Choose Specified Brands And Specifications
2. Can Modify Central Position Of Engine Cooling Fan2. Additional Auxiliary Systems Can Be Added For Special Applications
3. Can Choose Type Of Engine Fan From Mechanical Type Or Electric Type3. N/A
Fuel System1. Upgrade To Fuel Fitler That Integrated With Fuel Transfer Pump And Fuel Pre-HearterEngine Mounting System1. Can Modify Engine Mouting Bracket
Control System1. Ecu Can Setting To Different Control Mode, Including Can Communication, Analogue Control, Isc1,Isc2,Isc3 Speed Conrol Mode Etc
——END——

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

WhatsApp Online logo

Sales Team


Marine Sales - Mrs. Gazit Wong WhatApp-Icon

Train Sales - Mrs. Gazit Wong WhatApp-Icon

Automotive Sales - Mrs. Shelly LiuWhatApp-Icon

Industrial Sales - Mrs. Kitty Chen WhatApp-Icon

Generator Sales - Mrs. Erica WhatApp-Icon

Pump Sales - Mrs. Ryen WhatApp-Icon

Spare Parts - Mrs. Nora Chen WhatApp-Icon

Sales Manager - Mrs. Wendy Fu

Ventas españolas - Victoria

Sales Director - Mr. Jasper Lee       WhatApp-Icon

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-engine.com

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest