Select Page

DCEC QSZ13-G5-A G-Drive Engine

DCEC QSZ13-G5-A generator drive engine is a 6-cylinders in line,13 liter four-strokes engine with 130mm bore and 163mm stroke. Equipped with Electrically Control High-pressure Common Rail, comes with turbocharger and Air-Air intercooler.The prime power for 50HZ generator set (1500RPM) of DCEC QSZ13-G5-A generator drive engine is 550kW. 

As part of EMAC, SinoGen also provide complete power supply solutions that powered by DCEC, our ranges of products including open type generator set, silence type generator set, super silence type generator set, mobile trailer, complete power truck and complete power car for railways applications. We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

coming soon

coming soon

1. CMS’ XPI ultra-high pressure fuel injection system is adopted, and the fuel injection pressure is up to 2400bar;
2. Through precise combustion control, the minimum specific fuel consumption can reach 186g/KW.h, and the low fuel consumption area is wide and more fuel-efficient.
3. Integral all-steel piston design, cylinder block and crankshaft made of high-strength materials, can withstand super high explosion pressure of 230bar, rigorous component test verification, higher engine strength, and excellent reliability.
4. Excellent overall configuration, lighter weight and more compact structure in similar products, the maximum output power can reach 500 kilowatts, and the power is surging.

Technical Specifications

Basic Introduction of DCEC QSZ13-G5-A G-Drive Engine

Engine Model:QSZ13-G5-A(-A means 1500 RPM engine)
Engine Type:6 Cylinders
Displacement:13.0 L
Rated Speed:1500 RPM
Aspiration Method:Turbocharged & Air-Air Intercooler
Emission Standard:N/A
Bore*Storke:130 mm * 163 mm
Packing Size(L*W*H):1389 mm * 1050 mm * 1276 mm
Wet Weight:1310 kg
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C

Engine Model

Standby Power

Prime Power

Fuel System

Aspiration

QSZ13-G2-A589 kW @ 1500 RPM536 kW @ 1500 RPMHigh Pressure Common RailTurbocharged & Air-Air Intercooler
QSZ13-G2-B589 kW @ 1800 RPM536 kW @ 1800 RPMHigh Pressure Common RailTurbocharged & Air-Air Intercooler
QSZ13-G3-A629 kW @ 1500 RPM603 kW @ 1500 RPMHigh Pressure Common RailTurbocharged & Air-Air Intercooler
QSZ13-G3-B629 kW @ 1800 RPM603 kW @ 1800 RPMHigh Pressure Common RailTurbocharged & Air-Air Intercooler
QSZ13-G5-A629 kW @ 1500 RPM550 kW @ 1500 RPMHigh Pressure Common RailTurbocharged & Air-Air Intercooler
QSZ13-G5-B670 kW @ 1800 RPM585 kW @ 1800 RPMHigh Pressure Common RailTurbocharged & Air-Air Intercooler
QSZ13-G6-A501 kW @ 1500 RPM439 kW @ 1500 RPMHigh Pressure Common RailTurbocharged & Air-Air Intercooler
QSZ13-G6-B579 kW @ 1800 RPM482 kW @ 1800 RPMHigh Pressure Common RailTurbocharged & Air-Air Intercooler
QSZ13-G7-A561 kW @ 1500 RPM491 kW @ 1500 RPMHigh Pressure Common RailTurbocharged & Air-Air Intercooler
QSZ13-G7-B625 kW @ 1800 RPM548 kW @ 1800 RPMHigh Pressure Common RailTurbocharged & Air-Air Intercooler
——END——

General Infomation of DCEC QSZ13-G5-A Generator Drive Engine

Engine ModelQSZ13-G5-ADisplacement13.0 L
Compression Ratio17:1Bore*Storke130 mm * 163 mm
No. of Cylinders6Governor Regulation≤1%
AspirationTurbocharged & Air-Air IntercoolerCPL Code Revision3837
Approximate Engine Weight1245 kgFire Order1-5-3-6-2-4

Installation Data of DCEC QSZ13-G5-A Generator Drive Engine

Mass Moment of Inertia of Rotating Components (No Flywheel)1.48 kg.m2
Center of Gravity from Rear Face of Block519 mm
Center of Gravity above Crankshaft Centerline201 mm
Maximum static bending moment of FAN21 N.m
Maximum allowable weight on Engine Support1500 kg
Maximum (Static) Bending Moment at Rear Face of Block1356 N.m
——END——

Engine Performance Data 1500RPM/50HZ of DCEC QSZ13-G5-A Generator Drive Engine

Standby Power629 kW / 470 HPFuel Consumption80.1 kg / h
Prime Power550 kWM / 411 BHPIntake Air Flow27.8 m3/min
Continuous Power495 BHP / 370 kWMExhaust Gas Flow34.1 kg / min
Fuel Consumption195 g / kW.hAir to Fuel Ratio -air:fuel24.6
Cons 100%128.44 L / hExhaust Gas Temperature485 ℃
Governed Engine Speed1500 RPMRadiated Heat to Ambient67 kW
Engine Idle Speed411 kWmHeat Rejection to Coolant154 kW
Torque2617 N.mHeat Rejection to Exhaust355 kW
Friction Horsepower31 kWHeat Rejection to Fuel5.0 kW
Piston Speed8.15 m / sHeat Rejection to Aftercooler83 kW
Engine Water Flow to Engine405 L / minTurbochargerCompressor Outlet Pressure254 kPa
TurbochargerCompressor Outlet Temp203 ℃Charge Air Flow32.8 kg / min

 

 

DCEC QSZ13-G5-A Generator Drive Engine

 

System Technical Data of DCEC QSZ13-G5-A Generator Drive Engine

Exhaust SystemMax. back pressure imposed by complete exhaust system13 kPa
Maximum allowable static bending moment at exhaust outlet flange27 N.m
Exhaust pipe size (recommendatory)130 mm
Air Intake SystemMaximum Intake Air Restriction with Heavy Duty Air Cleaner—  Dirty Element6.2 kPa
Maximum Intake Air Restriction with Heavy Duty Air Cleaner— Clean Element3.2 kPa
Whole air intake pipe size (recommendatory)200 mm
Charge air cooler pipe size (recommendatory)115 mm
Maximum temperature rise between ambient air and engine air inlet11.1 ℃
Maximum Temp. Rise Between Engine Air Intake and Intake Manifold30 ℃
Maximum Intake Manifold Temperature60 ℃
Maximum Intake Manifold Temperature for Engine Protection85 ℃
Maximum allowable pressure drop across charge air cooler and OEM CAC piping13 kPa
Lubrication SystemOil pressure @ idle – minimum82.7 kPa
Typical oil pressure range – warm engine207 kPa-300 kPa
Total system capacity (standard pan)75.33 L
Maximum lube oil flow to all accessories7.57 L / min
Cooling SystemCoolant Capacity – Engine Only23.1 L
Engine coolant circuit thermostat fully open temperature94 ℃
Maximum coolant temperature – engine out102 ℃
Minimum operating block coolant temperature71 ℃
Standard Thermostat (Modulating) Range82 ℃
Maximum coolant temperature for engine protection controls107 ℃
Maximum coolant pressure407 kPa
Minimum pressure cap rating at sea leve103 kPa
Maximum Coolant Friction Head External to Engine75 kPa
Maximum deaeration time25 min
Minimum fill rate19 L / min
Electrical SystemSystem voltage24 V
Minimum battery capacity-cold soak at -18 C (0 F) or above
Engine only cold cranking amperes:900 CCA
Engine only reserve capacity:270 min
Cool Start SystemMinimum ambient temperature for unaided cold start﹣15 ℃
Minimum ambient temperature with Intake Air Heater(engine no load)﹣30 ℃
——END——

Scopes of Supply of DCEC QSZ13-G5-A Generator Drive Engine

Air Intake System1. Air Intake ManifoldExhuast System1. Exhuast Manifold
2. Standard Air Filter2. Turbocharger
3. Water-Air Intercooler3. Exhuast Elbow
Starting System1. Starter MotorCharging System1. Charging Alternator
2. Starter Rely2. N/A
Lubricating System1. Oil PumpCooling System1. Water Pump
2. Oil Filter2. Engine Fan
3. N/A3. Standard Radiator
Engine Shut-Down System1. Engine Fuel Shut-Off SolenoidPower Output System1. Flywheel
2. N/A2. Standard Flywheel Housing
Fuel System1. Fuel Transfer Pump
2. High-Pressure Fuel Pump
3. Fuel Filter
——END——

Optional Accessories of DCEC QSZ13-G5-A Generator Drive Engine

Air Intake System1. Air Intake Pre-HeaterExhuast System1. Muffler & Bellows
2. Air Intake Shut-Off Valve2. Spark Arrestor Type Muffler & Bellows
3. Heavy-Duty Air Filter3. DPF System
4. Plateau Type Air Filter4. N/A
Fuel System1. Coarse FilterLubricating System1. Oil Pre-Heater
2. Fuel Pre-Heater2. N/A
Starting System1. Manual Magnetic DC ContactorCooling System1. Silent Type Radiator
2. Dual Ears Flywheel Housing2. Plateau Radiator
3. Spring Starter Motor3. Salt-Spray Resistant Radiator
4. Air Starter Motor4. Coolant Pre-Heater
5. Hydraulic Starter Motor5. Jacket Water Heater
6. Manual Magnetic DC Contactor6. N/A
——END——

 

As part of EMAC, SinoGen focusing on generator set related business, from Generator drive engine power pack to complete generator set, from generator control panel to synchronizing cabinet, from super silent type generator set to mobile power trailer, SinoGen provides professional one-stop solution for everything customer needed for generator set.
For more information of our complete generator set products, you are welcome to visit SinoGen homepage: www.sino-gen.com

Modifiable components of DCEC QSZ13-G5-A Generator Drive Engine

Air Intake System1. Installation Position of Air FilterCharging System1. 12V Charging Alternator for 12V Electric System
2. Upgrade to Heavy-Duty Type Air Fitler2. Explosion-Proof Charging Alternator
Exhuast System1. Position of TurbochargerLubricating System1. Oil Pan Position
2. Water-Cooled Exhuast Manifold2. Number of Dipstick
3. Water-Cooled Turbocharger3. Position of Dipstick
Fuel System1. Upgrade to Fuel Fitler that Integrated with Fuel Transfer PumpStarting System1. 12V Starter Motor for 12V Electric System
Engine Shut-Down System1. 12V Solenoid for 12V Electric SystemPower Output System1. Size of Flywheel Housing and Flywheel.
2. Explosion-Proof Solenoid2. Dual-Ear Flywheel Housing (For Twin-Starter System)
——END——

Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

WhatsApp Online logo

Sales Team


Generator Engine - Mr. Haden Wu

Marine Engine - Mrs. Hailey Tang

Automotive Engine - Mr. Wells Luo

Industrial Engine - Mrs. Luna Fu

Pump Engine - Miss. Zora Zhou

Engine Parts-Miss. Nora

Sales Director - Mr. Jasper Lee      

Service Team


Technical Service - Mr. Vin Hu

Customer Service - Mrs. Wendy Fu

Contact EMAC Now!

12 + 4 =

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-engine.com

You have Successfully Subscribed!

Pin It on Pinterest