Select Page

DCEC ISL9.5-385E51A Automotive Engine

DCEC ISL9.5-385E51A automotive engine is a 6-cylinders in line, 9.46 liter four-strokes engine with 116.5mm bore and 148mm stroke, equipped with Electrically Control High-pressure Common Rail, DCEC ISL9.5-385E51A automotive engine comes with turbocharger and Air- Air intercooler, with a EURO V post-processor. The prime power at 1900RPM of DCEC ISL9.5-385E51A automotive engine is 385 HP.

As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, Dongfeng-DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system. We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

coming soon

coming soon

1.The design of the heavy engine: heavy intensity, heavy oil and Filtration supply system, longer oil interval.
2.Cummins high-pressure common rail fuel system, electronically controlled fuel injection, achieve engine operation within the scope of the best combustion state, Provide the best efficiency and power.
3.High performance, 4 valves per cylinder setting, Air combustion ratio, greatly improve engine performance, Air to air intercooler reduces intake air temperature, holset exhaust bypass turbocharger improve low-speed torque.
4.The lowest operating costs, engine full electric control, lowest use cost and minimum maintenance time, economy ahead of rivals greatly.
5.Automatic fault diagnosis, Safety is no need to adjust within 200,000 km , 600,000 km overhaul cycle.
6.Optimal performance, use the advanced ECM module and fault diagnosis system, can automatically set operation parameters and can conduct engine self regulation and protection.
7.Excellence power, Clean burning, use the advanced lean-burn closed loop electronic control system.

Technical Specifications

Basic Introduction of DCEC ISL9.5-385E51A Automotive Engine

Engine Model:ISL9.5-385E51A
Engine Type:6
Displacement:9.46 L
Rated Speed:1900 RPM
Aspiration Method:Turbocharged & Air-Air Intercooler
Emission Standard:N/A
Bore*Storke:116.5 mm * 148 mm
Packing Size(L*W*H):N/A
Wet Weight:N/A
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C
DCEC-L-Automotive-Engine-620x350

Engine Model

Advertised Power

Peak Torque

Number Of Cylinders

Fuel System

ISL9.5-385E51A378 HP @ 1900 RPM1600 N.m @ 1300 RPM6 CylindersCFSW(HPCR)
ISL9.5-400E40A395 HP @ 1900 RPM1710 N.m @ 1200-1400 RPM6 CylindersCFSW(HPCR)
——END——

 

General Infomation of DCEC ISL9.5-ISL9.5-385E51A Automotive Engine

Engine ModelISL9.5-385E51AAdvertised Power385 HP @ 1900 RPM
Peak Torque1600 N.m @ 1300 RPMCurve & DatasheetFR94958
Fuel SystemCFSW(HPCR)No. Of Cylinders6
AspirationTurbocharged & Air-Air IntercoolerDisplacement9.46 L
Bore*Storke116.52 mm * 148 mmCPL Code Revision4692
Dry WeightN/AWet WeightN/A
Compression Ratio16.6:1Emission StandardCHINA V

Installation Data of DCEC ISL9.5-ISL9.5-385E51A Automotive Engine

Maximum Low Idle Speed700 RPM
Nominal No Load Governed Speed2285 RPM
Maximum overspeed performance (not exceeding 15 seconds)1200 RPM
Clutch Engagement Torque At 800 RPM1200 N.m
Maximum Altitude For Continuous Operation Without Derate4000 m
——END——

Engine Performance Data Rated power of DCEC ISL9.5-385E51A Automotive Drive Engine

Maximum PowerPeak Torque
Engine Speed1900 RPM1300 RPM
Output Power282  kW233 kW
Torque1418  N.m1710 N.m
Charge Air Flow23 kg/min15 kg/min
Exhaust Gas Flow24 kg/min16 kg/min
Exhaust Gas Temperature506℃504℃
Heat Rejection To Coolant114 Kw86 Kw
Radiator Coolant Flow Rate246 l/min175 l/min
Heat Rejection To Charge Air Cooler45 kW26 Kw
Turbo Comp Outlet Pressure193 kPa167 kPa
Turbo Comp Outlet Temperature173 ℃157 ℃
Fuel Consumption57 kg/hr42 kg/hr
——END——
System Technical Data of DCEC ISL9.5-385E51A Automotive Drive Engine
Air Intake SystemMaximum Temperature Rise Between Ambient Air and Engine Air Inlet15
   
Exhaust SystemMaximum Exhaust Resistance Formed by the Exhaust System20 kPa
 
Cooling SystemMaximum Coolant Outlet Temperature Under 100 kPa Pressure Cap110
Maximum Coolant Pressure (Without Pressure Cap Thermostat Closed)N/A
Maximum Intake Temperature Rise Between the Intake Manifold and the Environment30
Maximum Pressure Difference Between the Supercharger Compressor Outlet and the Intake Manifold Inlet13.5 kPa
Engine Protection Controls Maximum Coolant Temperature113
   
——END——

Scopes of Supply of DCEC ISL9.5-385E51A Automotive Engine

Air Intake System1. Air Intake ManifoldExhuast System1. Exhuast Manifold
2. Water-Air Intercooler2. Turbocharger
3. N/A3. Exhuast Elbow
Fuel System1. Fuel Transfer PumpStarting System1. Starter Motor
2. High-Pressure Fuel Pump2. Starter Rely
3. Fuel Filter3. N/A
Charging System1. Charging AlternatorEngine Shut-Down System1. Engine Puel Shut-Off Solenoid
Lubricating System1. Oil PumpCooling System1. Water Pump
2. Oil Filter2. Engine Fan
3. N/A3. Standard Radiator
Power Output System1. FlywheelEngine Mounting System1. Engine Mouting Bracket
2. Standard Flywheel Housing2. N/A
Engine Auiliary Accessories1. Air Compressor
2. Power Steering Pump
——END——

Optional Accessories of DCEC ISL9.5-385E51A Automotive Engine

Air Intake System1. Air Intake Pre-HeaterExhuast System1. Muffler & Bellows
2. Air Intake Shut-Off Valve2. Flame Trap
3. Air Filter3. Spark Arrestor Type Muffler & Bellows
4. Air Intake Pre-Filter4. DPF System
5. Air Filter Alarm System5. N/A
Fuel System1. Coarse FilterStarting System1.Manual Magnetic DC Contactor
2. Fuel Pre-Heater2. Dual Ears Flywheel Housing
3. N/A3. Spring Starter Motor
4. N/A4. Air Starter Motor
5. N/A5. Hydraulic Starter Motor
Lubricating System1. Oil Pre-Heater.Cooling System1. Silent Type Radiator
2. N/A2. Plateau Radiator
3. N/A3. Salt-Spray Resistant Radiator
4. N/A4. Coolant Pre-Heater
Power Output System1. ClutchEngine Mounting System1. Shock Absorber Pad
Engine Auiliary Accessories1. Hydraulic Oil PumpControl System1. Can Add Mechanical Accelerator Pedal
2. Air Conditioner Compressor2. N/A
3. N/A3. N/A
——END——

As part of EMAC, SinoGen focusing on generator set related business, from Generator drive engine power pack to complete generator set, from generator control panel to synchronizing cabinet, from super silent type generator set to mobile power trailer, SinoGen provides professional one-stop solution for everything customer needed for generator set. For more information of our complete generator set products, you are welcome to visit SinoGen homepage: www.sino-gen.com

Modifiable Components of DCEC ISL9.5-385E51A Automotive Engine

Air Intake System1. Installation Position of Air FilterExhuast System1. Can Modify Installation Position and Direction of
2. Upgrade to  Heavy-Duty Type Air FitlerTurbocharger
3. N/A2. Water-Cooled Exhuast manifold
4. N/A3. Water-Cooled Turbocharger
Fuel System1. Upgrade to Fuel Fitler That Integrated with Fuel TransferStarting System1. 12V Starter Motor For 12v Electric System
Pump and Fuel Pre-Hearter2. Upgrading to Specified Brand and Speicifications of
2. N/AStarter Motor
Charging System1. 12V Charging Alternator for 12v Electric SystemEngine Shut-Down System1. 12V Solenoid for 12v Electric System
2. Explosion-Proof Charging Alternator2. Explosion-Proof Solenoid
3. Upgrading to Specified Brand And Speicifications of3. N/A
Charging Alternator4. N/A
Lubricating System1. Oil Pan PositionCooling System1. Can Modify Engine Fan Into Blower Fan or Suction Fan
2. Number of Dipstick2. Can Modify Central Position of Engine Cooling Fan
3. Position of Dipstick Can Choose From 6 Positions3. Can Choose Type of Engine Fan From Mechanical Type or
4. Can Modify Oil Filter to be Remote InstallationElectric Type
Power Output System1. Can Modify Size of Flywheel Housing and Flywheel.Engine Mounting System1. Can Modify Engine Mouting Bracket.
2. Dual-Ear Flywheel Housing (for Twin-Starter System)2. N/A
3. Some of Models Can Modify Flywheel Housing Into PTO3. N/A
Integrated Type.4. N/A
4. Engine Have Connecting Port of PTOs, That Able to5. N/A
Provide Power Output.6. N/A
Engine Auiliary Accessories1. All of Auxiliary System Can Choose Specified Brands and
Specifications.
2. Additional Auxiliary Systems Can be Added for Special
Applications.
——END——

Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

The picture of Sale Manual showing the accessories and scopes of supply.

Engine Sale Manual

The picture of Installation Drawing showing the accessories and scopes of supply.

Installation Drawing

The picture of Installation Manual showing the accessories and scopes of supply.

Installation Manual

The picture of Operation Manual showing the accessories and scopes of supply.

Operation Manual

The picture of Engine Parts Catalogue showing the accessories and scopes of supply.

Parts Catalogue

The picture of Test Report and Certifcate showing the accessories and scopes of supply.

Report & Certifcate

WhatsApp Online logo

Sales Team


Generator Engine - Mr. Haden Wu

Marine Engine - Mrs. Hailey Tang

Automotive Engine - Mr. Wells Luo

Industrial Engine - Mrs. Luna Fu

Pump Engine - Miss. Zora Zhou

Engine Parts-Miss. Nora

Sales Director - Mr. Jasper Lee      

Service Team


Technical Service - Mr. Vin Hu

Customer Service - Mrs. Wendy Fu

Contact EMAC Now!

9 + 13 =

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-engine.com

You have Successfully Subscribed!

Pin It on Pinterest