ISF2.8s4148T Automotive Engine
BFCEC ISF2.8s4148T automotive engine is a 4-cylinders in line, 2.8 liter four-strokes engine with 94mm bore and 100mm stroke. Equipped with Electrically Control High-pressure Common Rail, engine comes with Turbocharged and Air- Air intercooler. The prime power at 3200RPM of BFCEC ISF2.8s4148T automotive engine is 110 kW.
As part of EMAC, DuraMac provides complete powertrain that integrated with BFCEC engine, Fast-Eaton clutch, FAST-CAT transmission, Dongfeng-DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system. We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.
Advantages of ISF2.8 Automotive Engine
1. The cylinder bore adopts a platform mesh honing design, the perfect geometric structure effectively prevents oil leakage, and adopts advanced technologies such as new piston ring components and gasket crimping molding to reduce oil loss.
2. The cylinder block and cylinder head adopt integrated design, which eliminates the occurrence of engine water leakage and oil leakage. The parts are about 40% less than other similar engines, and the failure rate is greatly reduced.
3. Forged steel camshaft and crankshaft, high-strength cylinder block design, multiple parts cast on the cylinder block, high rigidity, high pressure resistance, good reliability, and longer service life.
Introduction of ISF2.8s4148T
| Engine Model: | ISF2.8s4148T |
| Engine Type: | 4 Cylinders, in Line |
| Displacement: | 2.8 L |
| Advertised Power: | [email protected] |
| Aspiration Method: | T & C |
| Bore*Storke: | 94*100mm |
| Emission Standard: | CHINA IV |
| Packing Size(L*W*H): | 704*647*734mm |
| Dry Weight: | 214Kg |
| Lead Time: | 15-30 Working Days |
| Payment Terms: | T/T ,L/C |
Engine Model | Advertised Power | Peak Torque | No. of Cylinders | Torque | Fuel System |
| ISF2.8s4148T | [email protected] | 360Nm @1800RPM | 4Cylinders, in Line | 180N.m | Bosch Electronic |
| ISF2.8s4129T | [email protected] | 310Nm @1600RPM | 4 Cylinders, in Line | 180N.m | Bosch Electronic |
| ——END—— | |||||
General Infomation of BFCEC ISF2.8s4148T Automotive Engine | |||
| Engine Model | ISF2.8s4148T | Advertised Power | [email protected] rpm |
| Peak Torque | 360N.m @ 1800rpm | Curve&Datasheet | FR92834 |
| Compression Ratio | 16.5:1 | No. Of Cylinders | 4 |
| Aspiration | Turbocharged & Air-Air Intercooler | Displacement | 2.8L |
| Bore*Storke | 94*100mm | CPL Code Revision | 3409 |
| Fuel System | Bosch Electronic | Emissions Certification | Euro 4 |
Installation Data of BFCEC ISF2.8s4148T Automotive Engine | |||
| Maximum Low Idle Speed | 800rpm | ||
| Minimum Low Idle Speed | 700rpm | ||
| Maximum Non-Load Speed | 3600rpm | ||
| Over Speed Performance (Within 15 Seconds) | 4800rpm | ||
| The Clutch Torque @ 800Rpm | 180N.m | ||
| Maximum Altitude At Which Continuous Operation Is Allowed | 2200m | ||
| Max. Intake Temperature Rise Between Outside Air And Supercharger Inlet | 15℃ | ||
| The Maximum Exhaust Resistance Formed By The Exhaust System | 20kPa | ||
Cooling System of BFCEC ISF2.8s4148T Automotive Engine | |||
| Maximum Outlet Temperature Of Engine Coolant | 110℃ | ||
| The Maximum Pressure Of Coolant | 215kPa | ||
| Max. Temp. Rise Between Ambient Air And Air Intake Manifold | 30℃ | ||
| Max. Pressure Difference Of Turbocharger Outlet And Intake Manifold Inlet | 13.5kPa | ||
| Engine Protection Controls The Maximum Coolant Temperature | 114℃ | ||
| Maximum Coolant Flow To Accessories | 23l/min | ||
| ——END—— | |||