Select Page

DCEC Z14NS6B480 Automotive Engine

DCEC Z14NS6B480 automotive engine is a 4-cylinders in line, 4 liter four-strokes engine with 114mm bore and 145mm stroke, equipped with Bosch vp44 and RQV-K governor. DCEC Z14NS6B480 automotive engine comes with turbocharged and charge air cooled, with a EURO III post-processor.

The prime power at 1800RPM of DCEC Z14NS6B480 automotive engine is 480HP.

As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, Dongfeng-DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.

We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

Advantages of DCEC Z14NS6B480 Automotive Engine

  • Lower oil consumption,Extended stroke,the expansion of the combustion gas more fully, Increase effective efficiency output, the economy is better.

  • Strong power,advanced 4 air valves structure, greater horsepower, air burning more thoroughly, while making low speed torque increase, quicken response speedily, climb strongly.

  • Excellent reliability, with compulsive cold cut articulated pistons, Can bear extreme high mechanical load and heat load, Strength can be comparable with heavy engine.

  • Better emissions, Decorate injector and symmetrical combustion chamber in center, make the cylinder is more homogeneous mixture, burning more fully, lower emissions.

  • Super life, 30% engines 800,000 km without overhaul.

  • Excellence power, Clean burning, use the advanced lean-burn closed loop electronic control system.

  • Excellent cold start performance, equipped with air suction electric preheater and 7.8 kw power starter, completely improve the cold start performance of the engine. Through the arctic village-MoHe of China-36°C extreme low temperature validation.

Technical Specifications

Engine Model:Z14NS6B480
Engine Type:6
Displacement:13.5 L
Rated Speed:1800 RPM
Rated Power:358 kw @ 1800 RPM
Peak Torque:2400 N.m @ 1000 RPM
Fuel System:XPI
Aspiration Method:Turbocharged and Charge Air Cooled
Emission Standard:N/A
Bore*Storke:114 mm * 145 mm
Packing Size(L*W*H):N/A
Wet Weight:680 kg
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C

coming soon

coming soon

Engine Model

Advertised Power

Peak Torque

Number Of Cylinders

Fuel System

Z14NS6B480358 kW @ 1800RPM2400 Nm  @  1000 RPM6 CylindersXPI
Z14NS6B520388 kW @ 1800RPM2500 Nm  @  1000 RPM6 CylindersXPI
Z14NS6B560418 kW @ 1800RPM2650 Nm  @  1100 RPM6 CylindersXPI
Z14NS6B600441 kW @ 1800RPM2750 Nm  @ 1100 RPM6 CylindersXPI
——END——

General Infomation of Z14NS6B480 Automotive Engine

Engine ModelZ14NS6B480Advertised Power358 kw @ 1800 RPM
Peak Torque2400 N.m @ 1000 RPMConfigurationD1L3003BX03
Fuel SystemXPINo. Of Cylinders6
AspirationTurbocharged and Charge Air CooledDisplacement13.5 L
Bore*StorkeN/ACPL Code Revision4997
Compression Ratio18.4 :1Emission CertificationChina MEP NS VIB
Rating TypesN3 above 16 tonne, Truck 

Installation Data of DCEC Z14NS6B480 Automotive Engine

Maximum low idle speed750  RPM
Minimum low idle speed550  RPM
Nominal no load governed speed2000 RPM
Maximum overspeed capability2650 RPM
Clutch engagement torque available at the default idle speed900 N-m
Turbo modelHE550WG
Turbo frame sizeLarge
——END——

Engine Performance Data Rated power of  Z14NS6B480  Automotive Drive Engine

ParameterRated powerMaximum torque
Engine Speed1800 RPM1000 RPM
Output Power358 kW (480 hp)276 kW (370 hp)
Torque1900 N-m (1401 b-ft)2400 N-m (1770 lb-ft)
Turbo Comp. Outlet Pressure205.5 kPa (60.9 in-Hg)142.6 kPa (42.2 in-Hg
Turbo Comp. Outlet Temperature183 deg C (361 deg F)143 deg C (290 deg F)
Heat Rejection to Charge Air Cooler73 kW (4123 BTU  min)29.9 kW (1700 BTU / min)
Inlet Air Flow437 L/s (926 ft3/min)220 L/s (465 ft3/min)
Charge (Fresh Air) Flow33.8 kg/min (74.6 lb/min)17.0 kg/min (37.5 lb/min)
Exhaust Gas Flow453 L/s (959 ft3/min)230 L/s (487 ft3/min)
Exhaust Gas Temperature437 deg C (819 deg F)519 deg C (966 deg F)
Heat Rejection to Coolant137.5 kW (7819 BTU / min)104.4 kW (5937 BTU I min)
Radiator Coolant Flow6.6 L/s (104.6 gpm)3.7 L/s (58.6 gpm)
Fuel Consumption72.0 kg/hr (158.7 lb/hr)47.0 kg/hr (103.7 lb/hr
Brake Mean Effective Pressure2066 kPa (299.6 psi)2469 kPa (358.1 psi)

DCEC Z14NS6B480 Automotive Engine DATASHEET

System Technical Data of DCEC Z14NS6B480 Automotive Drive Engine

Air Intake SystemMax. temperature rise between ambient air and turbo air inlet11.1 delta deg C
  
Cooling SystemMaximum coolant temperature – engine out 107 deg C
Maximum coolant pressure (without pressure cap)300 kPa
Maximum power point, engine coolant outlet temperature difference56 delta deg C
Maximum torque point, temperature difference at engine coolant outlet61 delta deg C
Maximum power point, temperature difference between intercooler outlet and ambient temperature30 delta deg C
Maximum allowable pressure drop (CACDP) for intercooler with OEM intercooler piping13.5 kPa
Maximum coolant temperature to trigger engine protection control113 deg C
The maximum coolant expansion space ratio when the low level sensor alarm is triggered28%
  
Exhaust systemMaximum exhaust backpressure imposed by exhaust system66 kPa
Maximum exhaust back pressure (when equipped with DPF)48 kPa
Recommended exhaust pipe size116 mm
Engine speed corresponding to maximum exhaust back pressure1800 RPM
  
Fuel SystemFuel compatibilityN/A
Fuel componentsN/A
  
Cranking SystemMinimum ambient temperature for unaided cold start -15 deg C
Minimum ambient temperature with grid heater only-35 deg C
——END——

Scopes of Supply of DCEC Z14NS6B480 Automotive Engine

Air Intake System1. Air Intake ManifoldExhuast System1. Exhuast Manifold
2. Water-Air Intercooler2. Turbocharger
3. N/A3. Exhuast Elbow
Fuel System1. Fuel Transfer PumpStarting System1. Starter Motor
2. High-Pressure Fuel Pump2. Starter Rely
3. Fuel Filter3. N/A
Charging System1. Charging AlternatorEngine Shut-Down System1. Engine Puel Shut-Off Solenoid
Lubricating System1. Oil PumpCooling System1. Water Pump
2. Oil Filter2. Engine Fan
3. N/A3. Standard Radiator
Power Output System1. FlywheelEngine Mounting System1. Engine Mouting Bracket
2. Standard Flywheel Housing2. N/A
Engine Auiliary Accessories1. Air Compressor
2. Power Steering Pump
——END——

Optional Accessories of DCEC Z14NS6B480 Automotive Engine

Air Intake System1. Air Intake Pre-HeaterExhuast System1. Muffler & Bellows
2. Air Intake Shut-Off Valve2. Flame Trap
3. Air Filter3. Spark Arrestor Type Muffler & Bellows
4. Air Intake Pre-Filter4. DPF System
5. Air Filter Alarm System5. N/A
Fuel System1. Coarse FilterStarting System1.Manual Magnetic DC Contactor
2. Fuel Pre-Heater2. Dual Ears Flywheel Housing
3. N/A3. Spring Starter Motor
4. N/A4. Air Starter Motor
5. N/A5. Hydraulic Starter Motor
Lubricating System1. Oil Pre-Heater.Cooling System1. Silent Type Radiator
2. N/A2. Plateau Radiator
3. N/A3. Salt-Spray Resistant Radiator
4. N/A4. Coolant Pre-Heater
Power Output System1. ClutchEngine Mounting System1. Shock Absorber Pad
Engine Auiliary Accessories1. Hydraulic Oil PumpControl System1. Can Add Mechanical Accelerator Pedal
2. Air Conditioner Compressor2. N/A
3. N/A3. N/A
——END——

As part of EMAC, DuraMac is Committed to providing reliable powertrain system to commercial vehicle manufacturers around the world, a sub-brand of EMAC group that focusing on automotive application. Based on dozens of world-class engine manufacturing resources in China, and as official exporting agent of Fast tranmission (Joint venture with Caterpillar AT tranmission), Dongfeng Dana axle and Komman air suspension, DuraMac provides one-stop solutions covers from pre-design to components supply, from installation to commissioning, from pre-sales communication to after-sales service support.
For more information of our automotive power system products, you are welcome to visit DuraMac homepage: www.duramac.com

Modifiable Components of DCEC Z14NS6B480 Automotive Engine

Air Intake System1. Installation Position of Air FilterExhuast System1. Can Modify Installation Position and Direction of
2. Upgrade to  Heavy-Duty Type Air FitlerTurbocharger
3. N/A2. Water-Cooled Exhuast manifold
4. N/A3. Water-Cooled Turbocharger
Fuel System1. Upgrade to Fuel Fitler That Integrated with Fuel TransferStarting System1. 12V Starter Motor For 12v Electric System
Pump and Fuel Pre-Hearter2. Upgrading to Specified Brand and Speicifications of
2. N/AStarter Motor
Charging System1. 12V Charging Alternator for 12v Electric SystemEngine Shut-Down System1. 12V Solenoid for 12v Electric System
2. Explosion-Proof Charging Alternator2. Explosion-Proof Solenoid
3. Upgrading to Specified Brand And Speicifications of3. N/A
Charging Alternator4. N/A
Lubricating System1. Oil Pan PositionCooling System1. Can Modify Engine Fan Into Blower Fan or Suction Fan
2. Number of Dipstick2. Can Modify Central Position of Engine Cooling Fan
3. Position of Dipstick Can Choose From 6 Positions3. Can Choose Type of Engine Fan From Mechanical Type or
4. Can Modify Oil Filter to be Remote InstallationElectric Type
Power Output System1. Can Modify Size of Flywheel Housing and Flywheel.Engine Mounting System1. Can Modify Engine Mouting Bracket.
2. Dual-Ear Flywheel Housing (for Twin-Starter System)2. N/A
3. Some of Models Can Modify Flywheel Housing Into PTO3. N/A
Integrated Type.4. N/A
4. Engine Have Connecting Port of PTOs, That Able to5. N/A
Provide Power Output.6. N/A
Engine Auiliary Accessories1. All of Auxiliary System Can Choose Specified Brands and
Specifications.
2. Additional Auxiliary Systems Can be Added for Special
Applications.
——END——

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

The picture of Sale Manual showing the accessories and scopes of supply.

Engine Sale Manual

The picture of Installation Drawing showing the accessories and scopes of supply.

Installation Drawing

The picture of Installation Manual showing the accessories and scopes of supply.

Installation Manual

The picture of Operation Manual showing the accessories and scopes of supply.

Operation Manual

The picture of Engine Parts Catalogue showing the accessories and scopes of supply.

Parts Catalogue

The picture of Test Report and Certifcate showing the accessories and scopes of supply.

Report & Certifcate

WhatsApp Online logo

Sales Team


Marine Sales - Mrs. Gazit Wong WhatApp-Icon

Train Sales - Mrs. Gazit Wong WhatApp-Icon

Automotive Sales - Mr. Wells Luo WhatApp-Icon

Industrial Sales - Mrs. Kitty Chen WhatApp-Icon

Generator Sales - Mrs. Erica WhatApp-Icon

Pump Sales - Mrs. Ryen WhatApp-Icon

Spare Parts - Mrs. Nora Chen WhatApp-Icon

Sales Manager - Mrs. Wendy Fu

Ventas españolas - Victoria

Sales Director - Mr. Jasper Lee       WhatApp-Icon

Contact EMAC Now!

3 + 8 =

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-engine.com

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest