Select Page

DCEC QSL8.9-C220-III Industrial Engine

DCEC QSL8.9-C220 engine is a 6-cylinders in line engine, which is a 8.9 liter four-strokes L series Industrial engine with 114mm bore and 144.5mm stroke. Equipped with CCR , engine comes with turbocharger and Air-Air Intercooler. Rated power is 160 KW at engine 2200 RPM.

Advantages of QSL8.9 Industrial Engine

1. The integrated oil and water pipeline replaces the traditional hose, eliminating the hidden danger of leakage; the enhanced cooling and lubrication function effectively prolongs the service life of the engine
2. Adopt high pressure common rail fuel system (HPCR) to ensure rapid throttle response at different speeds, better power and fuel economy, and lower noise
3. Adopting waste gas bypass turbocharger, the supercharging is smoother at low speed, and the power output is more stable at high speed
4. Mature intelligent electronic control technology improves the overall performance of the engine, and the engine specifications can be tailored according to application requirements

Introduction of QSL8.9-C220-III

Engine Model:QSL8.9-C220-III
Engine Type:6 Cylinders, in Line
Displacement:8.9L
Rated Speed:2200 rpm
Aspiration Method:T & C
Emission Standard:EU Stage3A
Torque:691N.m
Packing Size(L*W*H):1240*780*1185mm
Compression Ratio:17.73:1
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C

Engine Model

Engine Speed

Output Power

Torque

               Aspiration

QSL8.9-C220-III     2200RPM        160KW 691N.mTurbocharged&Air-Air Intercooler
QSL8.9-C325-III     2100RPM        242KW1102N.mTurbocharged&Air-Air Intercooler
QSL8.9-C340-III     2100RPM        250KW1139N.mTurbocharged&Air-Air Intercooler
QSL8.9-C360-III     2100RPM        264KW1200N.mTurbocharged&Air-Air Intercooler
——END——

 

General Infomation of DCEC QSL8.9-C220-III Industrial Engine

Engine ModelQSL8.9-C220-IIIEmission StandardEU Stage3A
AspirationTurbocharged&Air-Air IntercoolerDisplacement8.9L
No. of Cylinders6CPL Code Revision4476
Packing Size(L*W*H)1240*780*1185mmFuel SystemCCR
Compression Ratio17.73:1Bore*Storke114*144.5mm
    

Installation Data of DCEC QSL8.9-C220-III Industrial Engine

Maximum Idle Speed900RPM
Minimum Idle Speed700RPM
Maximum No-Load Speed2386RPM
Maximum Overspeed Performance (Not Exceeding 15 Seconds)3150RPM
Clutch Engagement Torque At 800RPM843N.m
Maximum Altitude Allowed For Continuous Operation4700m
——END——

 

Engine Performance Data Rated Power of DCEC QSL8.9-C220-III Industrial Engine

Rated PowerTorque PeakRated PowerTorque Peak
Engine Speed2200RPM1500RPM   Exhaust Gas Flow25.50KG18.77KG
Gross Power Output160KW147KW   Exhaust Gas Temp.531℃561℃
Torque691N.m936N.m   Turbo Comp. Outlet Pressure170kPa113kPa
The Air Flow320L/s235L/s   Turbo Comp. Outlet Temp.148℃127℃
Charge Air Flow24.85KG18.21G   The Fuel Flow21.2KG14.4KG

 

 

 

System Technical Data of DCEC  QSL8.9-C220-III Industrial Engine

Air Intake SystemMaximum Intake Temperature Rise Between Outside Air And Supercharger Inlet15°C
Exhaust SystemMaximum Exhaust Back Pressure:10kPa
Cooling SystemMaximum Coolant Outlet Temperature Under 100Kpa Pressure Cap107℃
Maximum Coolant Pressure234kPa
Maximum Intake Temperature Rise Between The Intake Manifold And The Environment30℃
Max.Pressure Difference Between The Supercharger Compressor Outlet And The Intake Manifold Inlet13.5kPa
Engine Protection Controls Maximum Coolant Temperature114℃
——END——

 

Scopes of Supply of DCEC  QSL8.9-C220-III Industrial Drive Engine

Cooling System1. Water pumpExhuast System1. Exhuast manifold
2. Engine Fan2. Turbocharger
3. Standard radiator3. Exhuast elbow
Starting System1. Starter motorFuel System1. Common rail fuel system
2. Starter rely2. Fuel Filter
Lubricating System1. Oil pumpPower Output System1. Flywheel
2. Oil filter2. Standard flywheel housing
Air Intake System1. Air intake manifoldCharging System1. Charging alternator
Engine Mounting System1. Engine Mouting BracketEngine Auiliary Accessories1. Air compressor
Control System1. ECU & sensors 
——END——

 

Optional Accessories of DCEC  QSL8.9-C220-III Industrial Drive Engine

Air Intake System1. Air Intake pre-heaterExhuast System1. Muffler & bellows
2. Air intake shut-off valve2. Flame trap
3. Air filter3. Spark arrestor type Muffler & bellows
4. Air intake pre-filter4. DPF system
5. Air filter alarm system5. N/A
Engine Auiliary Accessories1. Hydraulic oil pumpControl System1. Can add engine monitoring system, contro system with wiring harness.
2. Air conditioner compressor2. Can add self-protection system that integrated with alarm system.
Starting System1. Manual Magnetic DC ContactorCooling System1. Silent Type Radiator
2. Dual ears flywheel housing2. Plateau Radiator
3. Spring Starter Motor3. Salt-Spray Resistant Radiator
4. Air Starter Motor4. Coolant pre-heater
5. Hydraulic Starter Motor5. Jacket water heater
6. Remote starting function6. N/A
7. Lock protection function of starter motor7. N/A
8. Manual Magnetic DC Contactor
 
Fuel System1. Coarse FilterLubricating System1. Oil pre-heater.
 
Power Output System1. ClutchEngine Mounting System1. Shock absorber pad
——END——

 

Modifiable components of DCEC  QSL8.9-C220-III Industrial Drive Engine

Exhuast System1. Can modify installation position and direction of turbochargerCharging System1. 12V charging alternator for 12v electric system
1. Can modify installation position and direction of turbocharger2. Explosion-proof charging alternator
3. Water-cooled turbocharger3. Upgrading to specified brand and speicifications of charging alternator
Power Output System1. Can modify size of flywheel housing and flywheel.Lubricating System1. Oil Pan position
2. Dual-ear flywheel housing (For twin-starter system)2. Number of dipstick
3. Some of models can modify flywheel housing into PTO integrated type.3. Position of dipstick can choose from 6 positions
4. Engine have connecting port of PTOs, that able to provide power output4. Can modify oil filter to be remote installation
Cooling System1. Can modify engine fan into blower fan or suction fanEngine Auiliary Accessories1. All of auxiliary system can choose specified brands and specifications.
2. Can modify central position of engine cooling fan2. Additional auxiliary systems can be added for special applications.
3. Can choose type of engine fan from mechanical type or electric type3. N/A
Fuel System1. Upgrade to fuel fitler that integrated with fuel transfer pump and fuel pre-hearterEngine Mounting System1. Can modify engine mouting bracket.
Control System1. ECU can setting to different control mode, including CAN communication, analogue control, ISC1,ISC2,ISC3 speed conrol mode etc.
——END——

 

Contact EMAC Now!

3 + 15 =

WhatsApp Online logo

Sales Team


Generator Engine - Mr. Haden Wu

Marine Engine - Mrs. Hailey Tang

Automotive Engine - Mr. Vin Hu

Industrial Engine - Miss. Bella Huang

Pump Engine - Miss. Zora Zhou

Sales Director - Mr. Jasper Lee      

Service Team


Technical Service - Mr. Vin Hu

Customer Service - Mrs. Wendy Fu

Contact EMAC Now!

3 + 12 =

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-engine.com

You have Successfully Subscribed!

Pin It on Pinterest