Select Page

DCEC QSB5.9-C180-30 Industrial Engine

DCEC QSB5.9-C180-30 Industrial engine is a 6-cylinders in line, 5.9 liter four-strokes engine with 102mm bore and 120mm stroke. Equipped with Electrically Control High-pressure Common Rail, engine comes with turbocharger and Air- Air Intercooler.

The prime power at 2200RPM of DCEC QSB5.9-C180-30 Industrial engine is 180HP.

As part of EMAC, ConeMac provides industrial power pack solution that integrated with air intake, air exhaust, cooling system, control system, transmission and hydraulic accessories, We also supplying special products such as explosion proof engine, generator and water pump set, as well as ultra-low temperature condition engine power pack.

We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

Advantages of DCEC QSB5.9-C180-30 Industrial Engine

  • The five key systems of the engine are developed and optimized and integrated by Cummins to ensure the reliability of the engine.

  • Advanced design and sophisticated manufacturing, adapt to a variety of harsh working conditions, high strength, strong ability to work under heavy loads.

  • The cylinder block and cylinder head adopt integrated design, which prevents the occurrence of engine water leakage and oil leakage. The parts are about 40% less than other similar engines, and the failure rate is greatly reduced.

  • Using forged steel camshaft and crankshaft, high-strength cylinder block design, multiple parts cast on the cylinder block, high rigidity, high pressure resistance, good reliability, and longer service life.

  • The cylinder bore adopts a platform mesh honing design, the perfect geometric structure effectively prevents oil leakage, and the use of advanced technology such as new piston ring components and gasket crimping molding reduces oil loss.

Technical Specifications

Engine Model:QSB5.9-C180-30
Engine Type:6 Cylinders
Displacement:5.9 L
Rated Speed:2200 RPM
Rated Power:132 kW @ 2200 RPM
Peak Torque:800 N.m @ 1400 RPM
Fuel System:HPCR
Aspiration Method:Turbocharged & Air-Air Intercooler
Emission Standard:Euro Stage III
Bore*Storke:102 mm * 120 mm
Packing Size(L*W*H):1015 mm * 725 mm * 990 mm
Weight , Net Dry:453 kg
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C

 

Engine Model

Rated Power

Peak Torque

Fuel System

Aspiration

QSB5.9-C130-3097  kW @ 2200 RPM650 N.m @ 1400 RPMHPCRTurbocharged & Air-Air Intercooler
QSB5.9-C150-30113 kW @ 2000 RPM615 N.m @ 1500 RPMHPCRTurbocharged & Air-Air Intercooler
QSB5.9-C160-30120 kW @ 2200 RPM720 N.m @ 1400 RPMHPCRTurbocharged & Air-Air Intercooler
QSB5.9-C180-30132 kW @ 2200 RPM800 N.m @ 1400 RPMHPCRTurbocharged & Air-Air Intercooler
QSB5.9-C180-31132 kW @ 2400 RPM820 N.m @ 1400 RPMHPCRTurbocharged & Air-Air Intercooler
QSB5.9-C210-30154 kW @ 2200 RPM820 N.m @ 1400 RPMHPCRTurbocharged & Air-Air Intercooler
——END——

 

General Infomation of DCEC QSB5.9-C180-30 Industrial Engine

Engine ModelQSB5.9-C180-30Emission StandardEuro Stage III
Curve&DatasheetFR95262Displacement5.9 L
Compression Ratio17.3:1Bore*Storke102 mm * 120 mm
No. Of Cylinders6 CylindersDry Weight453 kg
Fuel SystemHPCRConfigurationD403111CX03
AspirationTurbocharged & Air-Air IntercoolerPacking Size(L*W*H)1015 mm * 725 mm * 990 mm
Rated Power132 kW @ 2200 RPMPeak Torque800 N.m @ 1400 RPM
 

Performance Data of DCEC QSB5.9-C180-30 Industrial Engine

Maximum Low Idle Speed900 RPMMinimum Idle Speed700 RPM
Maximum No-Load Speed2386 RPMClutch Engagement Torque at 800 RPM500 N.m
Maximum Overspeed Performance(No More than 15 Seconds)2500 RPMMaximum Altitude Allowed for Continuous Operation3000 m
——END——

 

Performance Data Rated Power of DCEC QSB5.9-C180-30 Industrial Engine

Rated PowerTorque PeakRated PowerTorque Peak
Engine Speed2200 RPM1400 RPMHeat Rejection to Coolant58 kW50 kW
Gross Power Output132 kW117 kWRadiator Coolant Flow163 L/min111 L/min
Torque574 N.m800 N.mHeat Loss to the Intercooler30 kW15 kW
Inlet Air Flow881 kg/h544 kg/hTurbo Comp. Outlet Pressure161 kPa130 kPa
Air Flow After PressurizationTBDTBDTurbo Comp. Outlet Temperature161 °C135 °C
Exhaust Gas Flow912 kg/min570 kg/minFuel Flow31 kg/hr26.3 kg/hr
Exhaust Gas Temperature530 °C580 °C
 

System Technical Data of DCEC QSB5.9-C180-30 Industrial Engine

Air Intake SystemMaximum Temperature Rise from Ambient to the Inlet of the Turbocharger15
Exhaust SystemMaximum Exhaust Resistance Formed by the Exhaust System21 kPa
Cooling SystemUnder The Pressure Cover Of 100 kPa, The Highest Coolant Outlet Temperature110
Maximum Coolant Pressure (Without Pressure Cap, Thermostat Closed)TBD
Maximum Intake Air Temperature Rise Between Intake Manifold And Environment30
The Maximum Pressure Difference Between the Outlet Of The Turbocharger Compressor And The Inlet Of The Intake Manifold13.5 kPa
Engine Protection Control Maximum Coolant Temperature104
Maximum Coolant Flow To AccessoriesTBD
——END——

 

Scopes of Supply of DCEC QSB5.9-C180-30 Industria Engine

Cooling System1. Water PumpExhuast System1. Exhuast Manifold
2. Engine Fan2. Turbocharger
3. Standard Radiator3. Exhuast Elbow
Starting System1. Starter MotorFuel System1. Common Rail Fuel System
2. Starter Rely2. Fuel Filter
Lubricating System1. Oil PumpPower Output System1. Flywheel
2. Oil Filter2. Standard Flywheel Housing
Air Intake System1. Air Intake ManifoldCharging System1. Charging Alternator
Engine Mounting System1. Engine Mouting BracketEngine Auiliary Accessories1. Air Compressor
Control System1. Ecu & Sensors
——END——

Optional Accessories of DCEC QSB5.9-C180-30 Industrial Engine

Air Intake System1. Air Intake Pre-HeaterExhuast System1. Muffler & Bellows
2. Air Intake Shut-Off Valve2. Flame Trap
3. Air Filter3. Spark Arrestor Type Muffler & Bellows
4. Air Intake Pre-Filter4. Dpf System
5. Air Filter Alarm System5. N/A
Engine Auiliary Accessories1. Hydraulic Oil PumpControl System1. Can Add Engine Monitoring System, Contro System With Wiring Harness
2. Air Conditioner Compressor2. Can Add Self-Protection System That Integrated with Alarm System
Starting System1. Manual Magnetic Dc ContactorCooling System1. Silent Type Radiator
2. Dual Ears Flywheel Housing2. Plateau Radiator
3. Spring Starter Motor3. Salt-Spray Resistant Radiator
4. Air Starter Motor4. Coolant Pre-Heater
5. Hydraulic Starter Motor5. Jacket Water Heater
6. Remote Starting Function6. N/A
7. Lock Protection Function Of Starter Motor7. N/A
8. Manual Magnetic Dc Contactor8. N/A
Fuel System1. Coarse FilterLubricating System1. Oil Pre-Heater
Power Output System1. ClutchEngine Mounting System1. Shock Absorber Pad
——END——

Committed to Providing Stable and Reliable Premiem Power System for Global Construction Machinery Manufacturer Partners, ConeMac is A Sub-Brand of the EMAC Group that Focuses on Construction Equipment Application.
ConeMac’s Ranges of Products Mainly Inclduing Marine Construction Engines Power Pack, Construction Equipment Gearbox, Gear Reducer, Explosion-Proof Engines, Generator Set and Water Pump Set for Mining, Oil and Gas Field.
For More Information of Our Industrial Power System Products, You Are Welcome to Visit ConeMac Homepage: Conemac.cn

 

Modifiable components of DCEC QSB5.9-C180-30 Industrial Engine

Exhuast System        Charging System1. 12V Charging Alternator For 12V Electric System
1. Can Modify Installation Position And Direction Of Turbocharger2. Explosion-Proof Charging Alternator
2. Water-Cooled Turbocharger3. Upgrading To Specified Brand And Speicifications Of Charging Alternator
Power Output System1. Can Modify Size Of Flywheel Housing And FlywheelLubricating System1. Oil Pan Position
2. Dual-Ear Flywheel Housing (For Twin-Starter System)2. Number Of Dipstick
3. Some Of Models Can Modify Flywheel Housing Into Pto Integrated Type3. Position Of Dipstick Can Choose From 6 Positions
4. Engine Have Connecting Port Of Ptos, That Able To Provide Power Output4. Can Modify Oil Filter To Be Remote Installation
Cooling System1. Can Modify Engine Fan Into Blower Fan Or Suction FanEngine Auiliary Accessories1. All Of Auxiliary System Can Choose Specified Brands And Specifications
2. Can Modify Central Position Of Engine Cooling Fan2. Additional Auxiliary Systems Can Be Added For Special Applications
3. Can Choose Type Of Engine Fan From Mechanical Type Or Electric Type3. N/A
Fuel System1. Upgrade To Fuel Fitler That Integrated With Fuel Transfer Pump And Fuel Pre-HearterEngine Mounting System1. Can Modify Engine Mouting Bracket
Control System1. Ecu Can Setting To Different Control Mode, Including Can Communication, Analogue Control, Isc1,Isc2,Isc3 Speed Conrol Mode Etc
——END——

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

WhatsApp Online logo

Sales Team


Marine Sales - Mrs. Gazit Wong WhatApp-Icon

Train Sales - Mrs. Gazit Wong WhatApp-Icon

Automotive Sales - Mrs. Shelly LiuWhatApp-Icon

Industrial Sales - Mrs. Kitty Chen WhatApp-Icon

Generator Sales - Mrs. Erica WhatApp-Icon

Pump Sales - Mrs. Ryen WhatApp-Icon

Spare Parts - Mrs. Nora Chen WhatApp-Icon

Sales Manager - Mrs. Wendy Fu

Ventas españolas - Victoria

Sales Director - Mr. Jasper Lee       WhatApp-Icon

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-engine.com

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest