Select Page

DCEC QSB3.9-C130-31 Industrial Engine

DCEC QSB3.9-C130-31 Industrial engine is a 4-cylinders in line, 3.9 liter four-strokes engine with 102mm bore and 120mm stroke. Equipped with Electrically Control High-pressure Common Rail, engine comes with turbocharger and Air- Air Intercooler. The prime power at 2500RPM of DCEC QSB3.9-C130-31 Industrial engine is 130HP.

As part of EMAC, ConeMac provides industrial power pack solution that integrated with air intake, air exhaust, cooling system, control system, transmission and hydraulic accessories, We also supplying special products such as explosion proof engine, generator and water pump set, as well as ultra-low temperature condition engine power pack. We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

Coming Soon

Coming Soon

1. Advanced design and sophisticated manufacturing, adapt to a variety of harsh working conditions, high strength, strong ability to work under heavy loads.
2. Cylinder block and cylinder head adopt integrated design, which eliminates the occurrence of engine water leakage and oil leakage. Parts are about 40% less than other similar engines, and the failure rate is greatly reduced.
3. Using forged steel camshaft and crankshaft, high-strength cylinder block design, multiple parts are cast on the cylinder block, with high rigidity, high pressure resistance, good reliability and longer service life.
4. The cylinder bore adopts a platform mesh honing design, and the perfect geometric structure effectively prevents oil leakage, and adopts advanced technology such as new piston ring components and gasket crimping molding to reduce oil loss.
5. Adopt Holset supercharger with integral wastegate valve, low speed response and strong power.

Technical Specifications

Basic Introduction of DCEC QSB3.9-C130-31 Industrial Engine

Engine Model:QSB3.9-C130-31
Engine Type:4 Cylinders
Displacement:3.9 L
Rated Speed:2500 RPM
Aspiration Method:Turbocharged & Air-Air Intercooler
Emission Standard:Euro Stage III
Bore*Storke:107 mm * 124 mm
Packing Size(L*W*H):N/A
Wet Weight:N / A
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C
DCEC QSB3.9 Industrial Engine

Engine Model

Rated Power

Peak Torque

Fuel System

Aspiration

QSB3.9-C110-3081 kW @ 2200 RPM480 N.m @1600 RPMHPCRTurbocharged & Air-Air Intercooler
QSB3.9-C125-3093 kW @ 2200 RPM480 N.m @1350 RPMHPCRTurbocharged & Air-Air Intercooler
QSB3.9-C130-3196 kW @ 2500 RPM520 N.m @1600 RPMHPCRTurbocharged & Air-Air Intercooler
——END——
 

General Infomation of DCEC QSB3.9-C130-31 Industrial Engine

Engine ModelQSB3.9-C130-31Bore*Storke107*124mm
Curve&DatasheetFR95420Displacement3.9 L
Emission StandardEuro Stage IIIRated Power81kW @ 2200 RPM
No. Of Cylinders4 CylindersPeak Torque480 N.m @1600 RPM
Fuel SystemHPCRConfigurationD383070CX03
AspirationTurbocharged & Air-Air IntercoolerPacking Size(L*W*H)N  /  A
——END——

Engine Performance Data Rated Power of DCEC QSB3.9-C130-31 Industrial Engine

Rated PowerTorque PeakLow speedRated PowerTorque PeakLow speed
Engine Speed2200 RPM1600 RPM800 RPM   Heat loss to coolant38.6 kW33.4 kW17.5 kW
Gross Power Output81 kW80 kW27 kW   Heat Rejection to Coolant180 l / min132 l / min97 l / min
Torque350 N.m480 N.m320 N.m   Heat loss to intercooler17 kW12.1 kW2.2 kW
The air flow123 l / s97 l / s26 l / s   Turbo Comp. Outlet Pressure150 kPa146 kPa20 kPa
Charge Air Flow9.58 kg7.54 kg2.01 kg   Turbo Comp. Outlet Temp.151 151 55
Exhaust Gas Flow9.91 kg7.84 kg2.12 kg   The fuel flow19.5 kg / hr17.8 kg / hr6.8 kg / hr
Exhaust Gas Temp.480 490 470

System Technical Data of DCEC QSB3.9-C130-31 Industrial Engine

Minimum idle speed1000±50  RPM
Maximum no-load speed2700±20  RPM
Maximum overspeed performance (not exceeding 15 seconds)3300  RPM
0% throttle loading capability320 N.m
Maximum altitude allowed for continuous operation4500 m
Cold starting capacity
Minimum cold starting temperature without auxiliary starting device:﹣12 °C
Minimum cold starting temperature for auxiliary starting device:﹣35 °C
——END——

 

Scopes of Supply of DCEC QSB3.9-C130-31 Industrial Drive Engine

Cooling System1. Water PumpExhuast System1. Exhuast Manifold
2. Engine Fan2. Turbocharger
3. Standard Radiator3. Exhuast Elbow
Starting System1. Starter MotorFuel System1. Common rail fuel system
2. Starter Rely2. Fuel Filter
Lubricating System1. Oil PumpPower Output System1. Flywheel
2. Oil Filter2. Standard flywheel Housing
Air Intake System1. Air intake ManifoldCharging System1. Charging Alternator
Engine Mounting System1. Engine Mouting BracketEngine Auiliary Accessories1. Air Compressor
Control System1. ECU & Sensors
——END——

 

Optional Accessories of DCEC QSB3.9-C130-31 Industrial Drive Engine

Air Intake System1. Air Intake Pre-heaterExhuast System1. Muffler & Bellows
2. Air intake Shut-off valve2. Flame Trap
3. Air Filter3. Spark Arrestor type Muffler & bellows
4. Air intake Pre-filter4. DPF System
5. Air Filter alarm System5. N / A
Engine Auiliary Accessories1. Hydraulic oil PumpControl System1. Can add engine Monitoring System, Contro System With Wiring Harness
2. Air Conditioner Compressor2. Can add Self-protection System That integrated With alarm System
Starting System1. Manual Magnetic DC ContactorCooling System1. Silent Type Radiator
2. Dual Ears Flywheel housing2. Plateau Radiator
3. Spring Starter Motor3. Salt-Spray Resistant Radiator
4. Air Starter Motor4. Coolant Pre-heater
5. Hydraulic Starter Motor5. Jacket Water heater
6. Remote Starting Function6. N/A
7. Lock Protection Function of Starter motor7. N/A
8. Manual Magnetic DC Contactor
Fuel System1. Coarse FilterLubricating System1. Oil pre-heater
Power Output System1. ClutchEngine Mounting System1. Shock absorber pad

——END——

  Committed to Providing Stable and Reliable Premiem Power System for Global Construction Machinery Manufacturer Partners, ConeMac is A Sub-Brand of the EMAC Group that Focuses on Construction Equipment Application. ConeMac’s Ranges of Products Mainly Inclduing Marine Construction Engines Power Pack, Construction Equipment Gearbox, Gear Reducer, Explosion-Proof Engines, Generator Set and Water Pump Set for Mining, Oil and Gas Field. For More Information of Our Industrial Power System Products, You Are Welcome to Visit ConeMac Homepage: Conemac.cn

Modifiable components of DCEC QSB3.9-C130-31 Industrial Drive Engine

Exhuast System1. Can Modify Installation Position and Direction of TurbochargerCharging System1. 12V Charging Alternator for 12V Electric System
2. N / A2. Explosion-proof Charging Alternator
3. Water-cooled Turbocharger3. Upgrading to Specified Brand and Speicifications of Charging Alternator
Power Output System1. Can Modify Size of Flywheel Housing and Flywheel.Lubricating System1. Oil Pan Position
2. Dual-ear Flywheel Housing (For Twin-Starter System)2. Number of Dipstick
3. Some of Models Can Modify Flywheel Housing Into PTO Integrated Type.3. Position of Dipstick Can Choose from 6 Positions
4. Engine Have Connecting Port of PTOs, That Able to Provide Power Output4. Can Modify Oil Filter to Be Remote Installation
Cooling System1. Can Modify Engine Fan Into Blower Fan Or Suction FanEngine Auiliary Accessories1. All of Auxiliary System Can Choose Specified Brands and Specifications
2. Can Modify Central Position of Engine Cooling Fan2. Additional Auxiliary Systems Can Be Added for Special Applications
3. Can Choose Type of Engine Fan from Mechanical Type or Electric Type3. N / A
Fuel System1. Upgrade to Fuel Fitler That Integrated with Fuel Transfer Pump and Fuel Pre-hearterEngine Mounting System1. Can Modify Engine Mouting Bracket
Control System1. ECU Can Setting to Different Control Mode, Including CAN Communication, Analogue Control, ISC1,ISC2,ISC3 Speed Conrol Mode Etc

——END——

Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

The picture of Sale Manual showing the accessories and scopes of supply.

Engine Sale Manual

The picture of Installation Drawing showing the accessories and scopes of supply.

Installation Drawing

The picture of Installation Manual showing the accessories and scopes of supply.

Installation Manual

The picture of Operation Manual showing the accessories and scopes of supply.

Operation Manual

The picture of Engine Parts Catalogue showing the accessories and scopes of supply.

Parts Catalogue

The picture of Test Report and Certifcate showing the accessories and scopes of supply.

Report & Certifcate

WhatsApp Online logo

Sales Team


Generator Engine - Mr. Haden Wu

Marine Engine - Mrs. Hailey Tang

Automotive Engine - Mr. Wells Luo

Industrial Engine - Mrs. Luna Fu

Pump Engine - Miss. Zora Zhou

Engine Parts-Miss. Nora

Sales Director - Mr. Jasper Lee      

Service Team


Technical Service - Mr. Vin Hu

Customer Service - Mrs. Wendy Fu

Contact EMAC Now!

9 + 2 =

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-engine.com

You have Successfully Subscribed!

Pin It on Pinterest