DCEC L9NS6B400 Automotive Engine
DCEC L9NS6B400 automotive engine is a 6-cylinders in line, 8.9 liter four-strokes engine with 114mm bore and 145mm stroke, equipped with Bosch P7100 pump and RQV-K governor. DCEC L9NS6B400 automotive engine comes with turbocharged and charge air cooled, with a EURO III post-processor.
The prime power at 1900RPM of DCEC L9NS6B400 automotive engine is 400HP.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, Dongfeng-DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.
Advantages of DCEC L9NS6B400 Automotive Engine
Lower oil consumption，Extended stroke，the expansion of the combustion gas more fully, Increase effective efficiency output, the economy is better.
Strong power，advanced 4 air valves structure, greater horsepower, air burning more thoroughly, while making low speed torque increase, quicken response speedily, climb strongly.
Excellent reliability, with compulsive cold cut articulated pistons, Can bear extreme high mechanical load and heat load, Strength can be comparable with heavy engine.
Better emissions, Decorate injector and symmetrical combustion chamber in center, make the cylinder is more homogeneous mixture, burning more fully, lower emissions.
Super life, 30% engines 800,000 km without overhaul.
Excellence power, Clean burning, use the advanced lean-burn closed loop electronic control system.
Excellent cold start performance, equipped with air suction electric preheater and 7.8 kw power starter, completely improve the cold start performance of the engine. Through the arctic village-MoHe of China-36°C extreme low temperature validation.
Technical Specifications
| Engine Model: | L9NS6B400 |
| Engine Type: | 6 |
| Displacement: | 8.9 L |
| Rated Speed: | 1900 RPM |
| Rated Power: | 294KW @ 1900 RPM |
| Peak Torque: | 1800Nm @ 1200 RPM |
| Fuel System: | CCR |
| Aspiration Method: | Turbocharged & Intercooler |
| Emission Standard: | N/A |
| Bore*Storke: | 114 mm * 145 mm |
| Packing Size(L*W*H): | N/A |
| Wet Weight: | 680 kg |
| Lead Time: | 15-30 Working Days |
| Payment Terms: | T/T ,L/C |
Engine Model | Advertised Power | Peak Torque | Number Of Cylinders | Fuel System | |||||||||||||||
| L9NS6B280 | 206 kW @ 1900 RPM | 1400 Nm @ 1000 RPM | 6 Cylinders | CCR | |||||||||||||||
| L9NS6B315 | 232 kW @ 1900 RPM | 1500 Nm @ 1100 RPM | 6 Cylinders | CCR | |||||||||||||||
| L9NS6B340 | 250 kW @ 1900 RPM | 1600 Nm @ 1100 RPM | 6 Cylinders | CCR | |||||||||||||||
| L9NS6B360 | 265 kW @ 1900 RPM | 1700 Nm @ 1200 RPM | 6 Cylinders | CCR | |||||||||||||||
| L9NS6B400 | 294 kW @ 1900 RPM | 1800 Nm @ 1200 RPM | 6 Cylinders | CCR | |||||||||||||||
| L9NS6B400-2 | 294 kW @ 1900 RPM | 1900 Nm@ 1300 RPM | 6 Cylinders | CCR | |||||||||||||||
| L9NS6B430 | 316 kW @ 2100 RPM | 1900 Nm @ 1300 RPM | 6 Cylinders | CCR | |||||||||||||||
| ——END—— | |||||||||||||||||||
General Infomation of L9NS6B400 Automotive Engine | |||||||||||||||||
| Engine Model | L9NS6B400 | Advertised Power | 294kW @ 1900 RPM | ||||||||||||||
| Peak Torque | 1800 Nm @ 1200 RPM | Configuration | D563028BX03 | ||||||||||||||
| Fuel System | CCR | No. Of Cylinders | 6 | ||||||||||||||
| Aspiration | Turbocharged and Charge Air Cooled | Displacement | 8.9 L | ||||||||||||||
| Bore*Storke | N/A | CPL Code Revision | 5282 | ||||||||||||||
| Compression Ratio | 16.5 :1 | Emission Certification | China MEP NS VIB | ||||||||||||||
| Rating Types | Emergency Vehicle, N3 above 16 tonne, Truck,Vocational | ||||||||||||||||
Installation Data of DCEC L9NS6B400 Automotive Engine | |||||||||||||||||
| Maximum low idle speed | 800 RPM | ||||||||||||||||
| Minimum low idle speed | 600 RPM | ||||||||||||||||
| Nominal no load governed speed | 2160 RPM | ||||||||||||||||
| Maximum overspeed capability | 2850 RPM | ||||||||||||||||
| Clutch engagement torque available at the default idle speed | 670 N-m | ||||||||||||||||
| Turbo model | HE400WG | ||||||||||||||||
| Turbo frame size | Medium-Large | ||||||||||||||||
| ——END—— | |||||||||||||||||
Engine Performance Data Rated power of L9NS6B400 Automotive Drive Engine | ||||||||||||||||
| Parameter | Rated power | Maximum torque | ||||||||||||||
| Engine Speed | 1900 RPM | 1200 RPM | ||||||||||||||
| Output Power | 294 kW (394 hp) | 226 kW (303 hp) | ||||||||||||||
| Torque | 1478 N-m (1090 lb-ft) | 1800 N-m (1328 b-ft) | ||||||||||||||
| Turbo Comp. Outlet Pressure | 209 kPa (61.9 in-Hg) | 197 kPa (58.3 in-Hg) | ||||||||||||||
| Turbo Comp. Outlet Temperature | 186 deg C (367 deg F) | 175 deg C (347 deg F) | ||||||||||||||
| Heat Rejection to Charge Air Cooler | 53 kW (3031 BTU/min) | 35.2 kW (2002 BTU/min) | ||||||||||||||
| Inlet Air Flow | 333 L/s (706 ft3/min) | 219 L/s (464 ft3/min) | ||||||||||||||
| Charge (Fresh Air) Flow | 23.4 kg/min (51.6 lb/min) | 15.3 kg/min (33.8 lb/min) | ||||||||||||||
| Exhaust Gas Flow | 698 L/s (1479 ft3/min) | 514 L/s (1089 ft3/min) | ||||||||||||||
| Exhaust Gas Temperature | 536 deg C (997 deg F) | 515 deg C (959 deg F) | ||||||||||||||
| Heat Rejection to Coolant | 120.4 kW (6847 BTU/min) | 98.6 kW (5607 BTU/min | ||||||||||||||
| Radiator Coolant Flow | 5.3 L/s (83.5 gpm) | 3.4 L/s (54.4 gpm) | ||||||||||||||
| Fuel Consumption | 61 kg/hr (134.5 lb/hr) | 44 kg/hr (97 lb/hr) | ||||||||||||||
| Brake Mean Effective Pressure | 2086 kPa (302.5 psi) | 2540 kPa (368.4 psi) | ||||||||||||||
System Technical Data of DCEC L9NS6B400 Automotive Drive Engine | ||||||||||||||||||
| Air Intake System | Max. temperature rise between ambient air and turbo air inlet | 11 delta deg C | ||||||||||||||||
| Cooling System | Maximum coolant temperature – engine out | 107 deg C | ||||||||||||||||
| Maximum coolant pressure (without pressure cap) | 284 kPa | |||||||||||||||||
| Maximum power point, engine coolant outlet temperature difference | 66 delta deg C | |||||||||||||||||
| Maximum torque point, temperature difference at engine coolant outlet | 71 delta deg C | |||||||||||||||||
| Maximum power point, temperature difference between intercooler outlet and ambient temperature | 30 delta deg C | |||||||||||||||||
| Maximum allowable pressure drop (CACDP) for intercooler with OEM intercooler piping | 13.5 kPa | |||||||||||||||||
| Maximum coolant temperature to trigger engine protection control | 112 deg C | |||||||||||||||||
| The maximum coolant expansion space ratio when the low level sensor alarm is triggered | 28% | |||||||||||||||||
| Exhaust system | Maximum exhaust backpressure imposed by exhaust system | 50 kPa | ||||||||||||||||
| Maximum exhaust back pressure (when equipped with DPF) | 30 kPa | |||||||||||||||||
| Recommended exhaust pipe size | 85 mm | |||||||||||||||||
| Engine speed corresponding to maximum exhaust back pressure | 1900 RPM | |||||||||||||||||
| Fuel System | Fuel compatibility | ULSD | ||||||||||||||||
| Fuel components | NS6 | |||||||||||||||||
| Cranking System | Minimum ambient temperature for unaided cold start | -15 deg C | ||||||||||||||||
| Minimum ambient temperature with grid heater only | -35 deg C | |||||||||||||||||
| ——END—— | ||||||||||||||||||
Scopes of Supply of DCEC L9NS6B400 Automotive Engine | ||||
| Air Intake System | 1. Air Intake Manifold | Exhuast System | 1. Exhuast Manifold | |
| 2. Water-Air Intercooler | 2. Turbocharger | |||
| 3. N/A | 3. Exhuast Elbow | |||
| Fuel System | 1. Fuel Transfer Pump | Starting System | 1. Starter Motor | |
| 2. High-Pressure Fuel Pump | 2. Starter Rely | |||
| 3. Fuel Filter | 3. N/A | |||
| Charging System | 1. Charging Alternator | Engine Shut-Down System | 1. Engine Puel Shut-Off Solenoid | |
| Lubricating System | 1. Oil Pump | Cooling System | 1. Water Pump | |
| 2. Oil Filter | 2. Engine Fan | |||
| 3. N/A | 3. Standard Radiator | |||
| Power Output System | 1. Flywheel | Engine Mounting System | 1. Engine Mouting Bracket | |
| 2. Standard Flywheel Housing | 2. N/A | |||
| Engine Auiliary Accessories | 1. Air Compressor | |||
| 2. Power Steering Pump | ||||
| ——END—— | ||||
Optional Accessories of DCEC L9NS6B400 Automotive Engine | ||||
| Air Intake System | 1. Air Intake Pre-Heater | Exhuast System | 1. Muffler & Bellows | |
| 2. Air Intake Shut-Off Valve | 2. Flame Trap | |||
| 3. Air Filter | 3. Spark Arrestor Type Muffler & Bellows | |||
| 4. Air Intake Pre-Filter | 4. DPF System | |||
| 5. Air Filter Alarm System | 5. N/A | |||
| Fuel System | 1. Coarse Filter | Starting System | 1.Manual Magnetic DC Contactor | |
| 2. Fuel Pre-Heater | 2. Dual Ears Flywheel Housing | |||
| 3. N/A | 3. Spring Starter Motor | |||
| 4. N/A | 4. Air Starter Motor | |||
| 5. N/A | 5. Hydraulic Starter Motor | |||
| Lubricating System | 1. Oil Pre-Heater. | Cooling System | 1. Silent Type Radiator | |
| 2. N/A | 2. Plateau Radiator | |||
| 3. N/A | 3. Salt-Spray Resistant Radiator | |||
| 4. N/A | 4. Coolant Pre-Heater | |||
| Power Output System | 1. Clutch | Engine Mounting System | 1. Shock Absorber Pad | |
| Engine Auiliary Accessories | 1. Hydraulic Oil Pump | Control System | 1. Can Add Mechanical Accelerator Pedal | |
| 2. Air Conditioner Compressor | 2. N/A | |||
| 3. N/A | 3. N/A | |||
| ——END—— | ||||
As part of EMAC, DuraMac is Committed to providing reliable powertrain system to commercial vehicle manufacturers around the world, a sub-brand of EMAC group that focusing on automotive application. Based on dozens of world-class engine manufacturing resources in China, and as official exporting agent of Fast tranmission (Joint venture with Caterpillar AT tranmission), Dongfeng Dana axle and Komman air suspension, DuraMac provides one-stop solutions covers from pre-design to components supply, from installation to commissioning, from pre-sales communication to after-sales service support.
For more information of our automotive power system products, you are welcome to visit DuraMac homepage: www.duramac.com
Modifiable Components of DCEC L9NS6B400 Automotive Engine | ||||
| Air Intake System | 1. Installation Position of Air Filter | Exhuast System | 1. Can Modify Installation Position and Direction of | |
| 2. Upgrade to Heavy-Duty Type Air Fitler | Turbocharger | |||
| 3. N/A | 2. Water-Cooled Exhuast manifold | |||
| 4. N/A | 3. Water-Cooled Turbocharger | |||
| Fuel System | 1. Upgrade to Fuel Fitler That Integrated with Fuel Transfer | Starting System | 1. 12V Starter Motor For 12v Electric System | |
| Pump and Fuel Pre-Hearter | 2. Upgrading to Specified Brand and Speicifications of | |||
| 2. N/A | Starter Motor | |||
| Charging System | 1. 12V Charging Alternator for 12v Electric System | Engine Shut-Down System | 1. 12V Solenoid for 12v Electric System | |
| 2. Explosion-Proof Charging Alternator | 2. Explosion-Proof Solenoid | |||
| 3. Upgrading to Specified Brand And Speicifications of | 3. N/A | |||
| Charging Alternator | 4. N/A | |||
| Lubricating System | 1. Oil Pan Position | Cooling System | 1. Can Modify Engine Fan Into Blower Fan or Suction Fan | |
| 2. Number of Dipstick | 2. Can Modify Central Position of Engine Cooling Fan | |||
| 3. Position of Dipstick Can Choose From 6 Positions | 3. Can Choose Type of Engine Fan From Mechanical Type or | |||
| 4. Can Modify Oil Filter to be Remote Installation | Electric Type | |||
| Power Output System | 1. Can Modify Size of Flywheel Housing and Flywheel. | Engine Mounting System | 1. Can Modify Engine Mouting Bracket. | |
| 2. Dual-Ear Flywheel Housing (for Twin-Starter System) | 2. N/A | |||
| 3. Some of Models Can Modify Flywheel Housing Into PTO | 3. N/A | |||
| Integrated Type. | 4. N/A | |||
| 4. Engine Have Connecting Port of PTOs, That Able to | 5. N/A | |||
| Provide Power Output. | 6. N/A | |||
| Engine Auiliary Accessories | 1. All of Auxiliary System Can Choose Specified Brands and | |||
| Specifications. | ||||
| 2. Additional Auxiliary Systems Can be Added for Special | ||||
| Applications. | ||||
| ——END—— | ||||
Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.
Engine Sale Manual
Installation Drawing
Installation Manual
Operation Manual
Parts Catalogue
![](/wp-content/uploads/2021/08/WhatApp-Icon.png"){kind=icon}
