Select Page

ISLe325 50 Automotive Engine

DCEC ISLe325 50 automotive engine is a 4-cylinders in line, 4 liter four-strokes engine with 114mm bore and 145mm stroke, equipped with Bosch vp44 and RQV-K governor. DCEC ISLe325 50 automotive engine comes with turbocharged and charge air cooled, with a EURO III post-processor.

The prime power at 2100RPM of DCEC ISLe325 50 automotive engine is 325HP.

As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, Dongfeng-DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.

We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

Advantages of DCEC ISLe325 50 Automotive Engine

  • Lower oil consumption,Extended stroke,the expansion of the combustion gas more fully, Increase effective efficiency output, the economy is better.

  • Strong power,advanced 4 air valves structure, greater horsepower, air burning more thoroughly, while making low speed torque increase, quicken response speedily, climb strongly.

  • Excellent reliability, with compulsive cold cut articulated pistons, Can bear extreme high mechanical load and heat load, Strength can be comparable with heavy engine.

  • Better emissions, Decorate injector and symmetrical combustion chamber in center, make the cylinder is more homogeneous mixture, burning more fully, lower emissions.

  • Super life, 30% engines 800,000 km without overhaul.

  • Excellence power, Clean burning, use the advanced lean-burn closed loop electronic control system.

  • Excellent cold start performance, equipped with air suction electric preheater and 7.8 kw power starter, completely improve the cold start performance of the engine. Through the arctic village-MoHe of China-36°C extreme low temperature validation.

Technical Specifications

Engine Model:ISLe325 50
Engine Type:6
Displacement:4 L
Rated Speed:2100 RPM
Rated Power / Speed:242 kW @ 2100 RPM
Peak Torque:1350 N.m @ 1100-1500 RPM
Fuel System:HPCR
Aspiration Method:Turbocharged & Intercooler
Emission Standard:N/A
Bore*Storke:114 mm * 145 mm
Packing Size(L*W*H):N/A
Wet Weight:680 kg
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C

coming soon

Engine Model

Advertised Power

Peak Torque

Number Of Cylinders

 Fuel System

ISLe270 30269 HP @ 2100 RPM1050  N.m  @  1200  RPM6 CylindersCCR
ISLe290 30285 HP @ 2100 RPM1050  N.m  @  1000 – 1900  RPM6 CylindersCCR
ISLe290-30289 HP @ 2100 RPM1050 N.m @ 1000-1900 RPM6 CylindersCCR
ISLe290 40285 HP @ 2100 RPM1050 N.m  @  1400 RPM6 CylindersCCR
ISLe290 50285 HP @ 2100 RPM1055 N.m  @  1100-1700 RPM6 CylindersCCR
ISLe292 40288 HP @ 2100 RPM1200 N.m  @  1400 RPM6 CylindersCCR
ISLe292 50285 HP @ 2100 RPM1055 N.m  @  1100-1700 RPM6 CylindersBosch  HPCR
ISLe310 30305 HP @ 2100 RPM1200 N.m @ 1000-1700 RPM6 CylindersCCR
ISLe310-30309 HP @ 2100 RPM1200 N.m @ 1000-1700 RPM6 CylindersCCR
ISLe315 40311 HP @ 2100 RPM1200 N.m  @  1400 RPM6 CylindersCCR
ISLe315 50315 HP @ 2100 RPM1200 N.m  @  1100-1700 RPM6 CylindersBosch  HPCR
ISLe325 40320 HP @ 2100 RPM1350 N.m  @  1400 RPM6 CylindersCCR
ISLe325 50324 HP @ 2100 RPM1350 N.m  @  1100-1500 RPM6 CylindersBosch  HPCR
ISLe340 30335 HP @ 2100 RPM1425 N.m @ 1100-1400 RPM6 CylindersCCR
ISLe340-30340 HP @ 2100 RPM1425 N.m @ 1100-1400 RPM6 CylindersCCR
ISLe340 40335 HP @ 2100 RPM1425 N.m  @  1400 RPM6 CylindersCCR
ISLe340 50340 HP @ 2100 RPM1500 N.m  @  1200-1400 RPM6 CylindersBosch  HPCR
ISLe360 40335 HP @ 2100 RPM1550 N.m  @  1400 RPM6 CylindersCCR
ISLe360 50359 HP @ 2100 RPM1550 N.m  @  1100-1400 RPM6 CylindersBosch  HPCR
ISLe375 30368 HP @ 2100 RPM1550 N.m @ 1100-1400 RPM6 CylindersCCR
ISLe375 30-II368 HP @ 2100 RPM1550 N.m @ 1100-1400 RPM6 CylindersCCR
ISLe375-30375 HP @ 2100 RPM1550 N.m @ 1100-1400 RPM6 CylindersCCR
ISLe375-40315 HP @ 2100 RPM1550 N.m @ 1100-1400 RPM6 CylindersCCR
ISLe375 50375 HP @ 2100 RPM1550 N.m  @  1100-1500 RPM6 CylindersBosch  HPCR
ISLe380 50379 HP @ 2100 RPM1700 N.m  @  1300-1400 RPM6 CylindersCCR
ISLe400 40394 HP @ 2100 RPM1700 N.m  @ 1400 RPM7 CylindersCCR
ISL8.9-292E50A288 HP @ 2100 RPM1150 N.m  @  1100-1700 RPM6 CylindersCCR
ISL8.9-315E50A311 HP @ 2100 RPM1190 N.m  @  1100-1700 RPM6 CylindersCCR
ISL8.9-340E51A337 HP @ 2100 RPM1500 N.m  @  1400 RPM6 CylindersCCR
ISL8.9E5280B280 HP @ 2100 RPM1055 N.m   @   1100 RPM6 CylindersCCR
ISL8.9E5320B260 HP @ 2500 RPM1350 N.m   @   1300 RPM6 CylindersCCR
ISL8.9E5340B335 HP @ 2100 RPM1500 N.m   @   1300 RPM6 CylindersCCR
——END——

General Infomation of DCEC ISLe325 50 Automotive Engine

Engine ModelISLe325 50Advertised Power325 HP @ 2100 RPM
Peak Torque1350 N.m @ 1100-1500 RPMConfigurationD563020BX03
Fuel SystemBosch HPCRNo. Of Cylinders6
AspirationTurbocharged and Charge Air CooledDisplacement8.9 L
Bore*StorkeN/ACPL Code Revision43309
Compression Ratio17.3:1 Emission CertificationEuro V
App typesTruck Emission StandardN/A

Installation Data of DCEC ISLe325 50 Automotive Engine

Maximum low idle speed800  RPM
Minimum low idle speed600  RPM
Nominal no load governed speed2400 RPM
Maximum overspeed capability3150 RPM
Clutch engagement torque available at the default idle speed950 N-m
Turbo modelHX40W
Turbo frame sizeMedium-Large Circlip
——END——

Engine Performance Data Rated power of  ISLe325 50  Automotive Drive Engine

ParameterGoverned PowerMaximum PowerPeak Torque
Engine Speed210 RPM2100 RPM 1300 RPM 
Output Power232 kW (311 hp)232 kW (311 hp) 163 kW (219 hp) 
Torque1055 N-m (778 lb-t)1055 N-m (778 lb-ft) 1200 N-m (885 lb-ft) 
Turbo Comp. Outlet Pressure183 kPa (54.2 in-Hg)183 kPa (54.2 in-Hg) 132 kPa (39.1 in-Hg) 
Turbo Comp. Outlet Temperature155 deg C (311 deg F)155 deg C (311 deg F) 118 deg C (244 deg F) 
Heat Rejection to Charge Air Cooler45 kW (2559 BTU/min)45 kW (2559 BTU/min) 18 kW (1024 BTU/min) 
Inlet Air Flow341 L/s (723 ft3/min)34 L/s (723 ft3/min) 182 L/s (386 ft3/min) 
Charge (Fresh Air) Flow23 kg/min (50.7 lb/min23 kg/min (50.7 lb/min) 12 kg/min (26.5 lb/min) 
Exhaust Gas Flow693 L/s (1468 ft3/min)69 L/s1468 ft3/min) 464 L/s (983 ft3/min) 
Exhaust Gas Temperature414 deg C (777 deg F)414 deg C (777 deg F) 485 deg C (905 deg F) 
Heat Rejection to Coolant105 kW (5971 BTU/min)105 kW (5971 BTU/min)90 kW (5118 BTU/min)
Radiator Coolant Flow4.5 L/s (72.1 gpm)4.5 L/s (72.1 gpm)163 L/s (2583.6 gpm
Fuel Consumption48 kg/hr (105.8 lb/hr)48 kg/hr (105.8 lb/hr)31 kg/hr (68.3 lb/hr)
DCEC ISLe325 50 Automotive Engine DATASHEET

System Technical Data of DCEC ISLe325 50 Automotive Drive Engine

Air Intake SystemMax. temperature rise between ambient air and turbo air inlet15 delta deg C
  
Cooling SystemMaximum coolant temperature – engine out 107 deg C
Maximum charge air cooler outlet temperature (pumping mode)55 deg C
Maximum coolant temperature – engine out (pumping mode) 107 deg C
Maximum coolant pressure (exclusive of pressure cap)243 kPa
Engine out coolant to ambient at maximum power checkpoint66 delta deg C
Engine out coolant to ambient at peak torque checkpoint 71 delta deg C
Charge air cooler outlet to ambient at maximum power checkpoint30 delta deg C
Maximum allowable pressure drop across charge air cooler and OEM CAC piping13.5 kPa
Maximum coolant temperature for engine protection controls114 deg C
Maximum coolant expansion space at low coolant level sensor activation28%
  
Exhaust systemMaximum exhaust backpressure imposed by exhaust system20 kPa
Recommended exhaust pipe size100 mm
Max. back pressure imposed by piping and EGPN/A
  
Fuel SystemFuel compatibilityDF1
Fuel componentsN/A
  
Cold Start PerformanceMinimum ambient temperature for unaided cold start -15 deg C
Minimum ambient temperature with grid heater only-20 deg C
——END——

Scopes of Supply of DCEC ISLe325 50 Automotive Engine

Air Intake System1. Air Intake ManifoldExhuast System1. Exhuast Manifold
2. Water-Air Intercooler2. Turbocharger
3. N/A3. Exhuast Elbow
Fuel System1. Fuel Transfer PumpStarting System1. Starter Motor
2. High-Pressure Fuel Pump2. Starter Rely
3. Fuel Filter3. N/A
Charging System1. Charging AlternatorEngine Shut-Down System1. Engine Puel Shut-Off Solenoid
Lubricating System1. Oil PumpCooling System1. Water Pump
2. Oil Filter2. Engine Fan
3. N/A3. Standard Radiator
Power Output System1. FlywheelEngine Mounting System1. Engine Mouting Bracket
2. Standard Flywheel Housing2. N/A
Engine Auiliary Accessories1. Air Compressor
2. Power Steering Pump
——END——

Optional Accessories of DCEC ISLe325 50 Automotive Engine

Air Intake System1. Air Intake Pre-HeaterExhuast System1. Muffler & Bellows
2. Air Intake Shut-Off Valve2. Flame Trap
3. Air Filter3. Spark Arrestor Type Muffler & Bellows
4. Air Intake Pre-Filter4. DPF System
5. Air Filter Alarm System5. N/A
Fuel System1. Coarse FilterStarting System1.Manual Magnetic DC Contactor
2. Fuel Pre-Heater2. Dual Ears Flywheel Housing
3. N/A3. Spring Starter Motor
4. N/A4. Air Starter Motor
5. N/A5. Hydraulic Starter Motor
Lubricating System1. Oil Pre-Heater.Cooling System1. Silent Type Radiator
2. N/A2. Plateau Radiator
3. N/A3. Salt-Spray Resistant Radiator
4. N/A4. Coolant Pre-Heater
Power Output System1. ClutchEngine Mounting System1. Shock Absorber Pad
Engine Auiliary Accessories1. Hydraulic Oil PumpControl System1. Can Add Mechanical Accelerator Pedal
2. Air Conditioner Compressor2. N/A
3. N/A3. N/A
——END——

As part of EMAC, DuraMac is Committed to providing reliable powertrain system to commercial vehicle manufacturers around the world, a sub-brand of EMAC group that focusing on automotive application. Based on dozens of world-class engine manufacturing resources in China, and as official exporting agent of Fast tranmission (Joint venture with Caterpillar AT tranmission), Dongfeng Dana axle and Komman air suspension, DuraMac provides one-stop solutions covers from pre-design to components supply, from installation to commissioning, from pre-sales communication to after-sales service support. For more information of our automotive power system products, you are welcome to visit DuraMac homepage: www.duramac.com

Modifiable Components of DCEC ISLe325 50 Automotive Engine

Air Intake System1. Installation Position of Air FilterExhuast System1. Can Modify Installation Position and Direction of
2. Upgrade to  Heavy-Duty Type Air FitlerTurbocharger
3. N/A2. Water-Cooled Exhuast manifold
4. N/A3. Water-Cooled Turbocharger
Fuel System1. Upgrade to Fuel Fitler That Integrated with Fuel TransferStarting System1. 12V Starter Motor For 12v Electric System
Pump and Fuel Pre-Hearter2. Upgrading to Specified Brand and Speicifications of
2. N/AStarter Motor
Charging System1. 12V Charging Alternator for 12v Electric SystemEngine Shut-Down System1. 12V Solenoid for 12v Electric System
2. Explosion-Proof Charging Alternator2. Explosion-Proof Solenoid
3. Upgrading to Specified Brand And Speicifications of3. N/A
Charging Alternator4. N/A
Lubricating System1. Oil Pan PositionCooling System1. Can Modify Engine Fan Into Blower Fan or Suction Fan
2. Number of Dipstick2. Can Modify Central Position of Engine Cooling Fan
3. Position of Dipstick Can Choose From 6 Positions3. Can Choose Type of Engine Fan From Mechanical Type or
4. Can Modify Oil Filter to be Remote InstallationElectric Type
Power Output System1. Can Modify Size of Flywheel Housing and Flywheel.Engine Mounting System1. Can Modify Engine Mouting Bracket.
2. Dual-Ear Flywheel Housing (for Twin-Starter System)2. N/A
3. Some of Models Can Modify Flywheel Housing Into PTO3. N/A
Integrated Type.4. N/A
4. Engine Have Connecting Port of PTOs, That Able to5. N/A
Provide Power Output.6. N/A
Engine Auiliary Accessories1. All of Auxiliary System Can Choose Specified Brands and
Specifications.
2. Additional Auxiliary Systems Can be Added for Special
Applications.
——END——

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

The picture of Sale Manual showing the accessories and scopes of supply.

Engine Sale Manual

The picture of Installation Drawing showing the accessories and scopes of supply.

Installation Drawing

The picture of Installation Manual showing the accessories and scopes of supply.

Installation Manual

The picture of Operation Manual showing the accessories and scopes of supply.

Operation Manual

The picture of Engine Parts Catalogue showing the accessories and scopes of supply.

Parts Catalogue

The picture of Test Report and Certifcate showing the accessories and scopes of supply.

Report & Certifcate

WhatsApp Online logo

Sales Team


Marine Service - SeaMacWhatApp-Icon

Automotive Service - DuraMacWhatApp-Icon

Industrial Service - ConeMacWhatApp-Icon

Generator Service -SinoGenWhatApp-Icon

Pump Service - PumpMacWhatApp-Icon

Parts Service - PartMacWhatApp-Icon

Sales Manager - Mrs. Wendy Fu

Sales Director - Mr. Jasper Lee       WhatApp-Icon


Shipping Service

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-engine.com

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest