Select Page

ISF2.8s4148T Automotive Engine

BFCEC ISF2.8s4148T automotive engine is a 4-cylinders in line, 2.8 liter four-strokes engine with 94mm bore and 100mm stroke. Equipped with Electrically Control High-pressure Common Rail, engine comes with Turbocharged and Air- Air intercooler.

The prime power at 3200RPM of BFCEC ISF2.8s4148T automotive engine is 148HP.

As part of EMAC, DuraMac provides complete powertrain that integrated with BFCEC engine, Fast-Eaton clutch, FAST-CAT transmission, Dongfeng-DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.

We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

Advantages of DCEC ISF2.8s4148T Automotive Engine

  • BFCEC ISF series 2.8-liter light engine is one of two in-line four-cylinder high-pressure direct-injection diesel engines that BFCEC has invested heavily in research and development. It is a new generation of fully electronically controlled light-duty diesel engines facing the future.

  • The overall modular design, the total number of parts is small, the failure rate is low, the structure is compact, and the maintenance is easy.

  • The high-pressure common rail fuel system has higher injection pressure, more precise control of injection timing and fuel quantity, more complete combustion, wider economic fuel consumption area, greatly improved fuel economy, further improved low-speed performance, noise reduction and cold start Better performance.

  • The engine subsystem is highly integrated, achieving fuel saving and consumption reduction in multiple ways, and higher power-up.

Technical Specifications

Engine Model:ISF2.8s4148T
Engine Type:4
Displacement:2.8 L
Rated Speed:3200 RPM
Rated Power / Speed:112 kW @ 3200 RPM
Peak Torque:340 N.m @ 1800 RPM
Fuel System:Bosch Electronic
Aspiration Method:Turbocharged & Air Intercooler
Emission Standard:Euro IV
Bore*Storke:94 mm * 100 mm
Packing Size(L*W*H):N/A
Wet Weight:213 kg
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C

coming soon

Engine Model

Advertised Power

Peak Torque

Number Of Cylinders

Fuel System

ISF2.8s3129T130 HP @ 3200 RPM310 N.m @ 1600 RPM4 CylindersBosch Electronic
ISF2.8s4129T130 HP @ 3200 RPM310 N.m @ 1600 RPM4 CylindersBosch Electronic
ISF2.8s4148T150 HP @ 3200 RPM150 N.m @ 1600 RPM4 CylindersBosch Electronic

General Infomation of DCEC ISF2.8s4148T Automotive Engine

Engine ModelISF2.8s4148TAdvertised Power150 HP @ 3200 RPM
Peak Torque340 N.m @ 1800 RPMCurve & DatasheetFR 92834
Fuel SystemBosch ElectronicNo. Of Cylinders4
AspirationTurbocharged & Air IntercoolerDisplacement2.8 L
Bore*Storke94 mm * 100 mmCPL Code Revision3409
Dry Weight N/AWet Weight N/A
Compression Ratio16.5:1Emission StandardEuro IV

Installation Data of DCEC ISF2.8s4148T Automotive Engine

Maximum Low Idle Speed800 RPM
Minimum Low Idle Speed700 RPM
Nominal No Load Governed Speed3600 RPM
Maximum Overspeed Capability4800 RPM
Clutch Engagement Torque At 800 RPM180 N.m
Maximum Altitude For Continuous Operation Without Derate2300 m

Engine Performance Data Rated power of DCEC ISF2.8s4148T Automotive Drive Engine

Maximum PowerPeak Torque
Engine Speed3200 RPM1600 RPM
Output Power110 kW68 kW
Torque328 N.m360 N.m
Inlet Air Flow551 m3/hr270 m3/hr
Charge Air Flow645 kg/hr315 kg/hr
Exhaust Gas Flow669 kg/hr329 kg/hr
Exhaust Gas Temperature486 499
Heat Rejection To Coolant46 kW32 kW
Radiator Coolant Flow Rate203 l/min119 l/min
Heat Rejection To Charge Air Cooler19 kW8 kW
Turbo Comp Outlet Pressure157.7 kPa110.5 kPa
Turbo Comp Outlet Temperature163.8 137.4
Fuel Consumption24.3 kg/hr13.9 kg/hr
Brake Mean Effective Pressure14.6  bar16.2  bar

Performance Curve-DCEC ISF2.8s4148T Automotive Engine

System Technical Data of DCEC ISF2.8s4148T Automotive Drive Engine

Air Intake SystemMaximum Temperature Rise Between Ambient Air And Engine Air Inlet15
Exhaust SystemMaximum Exhaust Resistance Formed By The Exhaust System20 kPa
Cooling SystemMaximum Coolant Outlet Temperature Under 100 kPa Pressure Cap110
Maximum Coolant Pressure (Without Pressure Cap Thermostat Closed)215 kPa
Maximum Intake Temperature Rise Between The Intake Manifold And The Environment30
Maximum Pressure Difference Between The Supercharger Compressor Outlet And The Intake Manifold Inlet13 kPa
Engine Protection Controls Maximum Coolant Temperature114

Scopes of Supply of DCEC ISF2.8s4148T Automotive Engine

Air Intake System1. Air Intake ManifoldExhuast System1. Exhuast Manifold
2. Water-Air Intercooler2. Turbocharger
3. N/A3. Exhuast Elbow
Fuel System1. Fuel Transfer PumpStarting System1. Starter Motor
2. High-Pressure Fuel Pump2. Starter Rely
3. Fuel Filter3. N/A
Charging System1. Charging AlternatorEngine Shut-Down System1. Engine Puel Shut-Off Solenoid
Lubricating System1. Oil PumpCooling System1. Water Pump
2. Oil Filter2. Engine Fan
3. N/A3. Standard Radiator
Power Output System1. FlywheelEngine Mounting System1. Engine Mouting Bracket
2. Standard Fflywheel Housing2. N/A
Engine Auiliary Accessories1. Air Compressor
2. Power Steering Pump

Optional Accessories of DCEC ISF2.8s4148T Automotive Engine

Air Intake System1. Air Intake Pre-HeaterExhuast System1. Muffler & Bellows
2. Air Intake Shut-Off Valve2. Flame Trap
3. Air Filter3. Spark Arrestor Type Muffler & Bellows
4. Air Intake Pre-Filter4. DPF System
5. Air Filter Alarm System5. N/A
Fuel System1. Coarse FilterStarting System1.Manual Magnetic DC Contactor
2. Fuel Pre-Heater2. Dual Ears Flywheel Housing
3. N/A3. Spring Starter Motor
4. N/A4. Air Starter Motor
5. N/A5. Hydraulic Starter Motor
Lubricating System1. Oil Pre-Heater.Cooling System1. Silent Type Radiator
2. N/A2. Plateau Radiator
3. N/A3. Salt-Spray Resistant Radiator
4. N/A4. Coolant Pre-Heater
Power Output System1. ClutchEngine Mounting System1. Shock Absorber Pad
Engine Auiliary Accessories1. Hydraulic Oil PumpControl System1. Can Add Mechanical Accelerator Pedal
2. Air Conditioner Compressor2. N/A
3. N/A3. N/A

As part of EMAC, DuraMac is Committed to providing reliable powertrain system to commercial vehicle manufacturers around the world, a sub-brand of EMAC group that focusing on automotive application. Based on dozens of world-class engine manufacturing resources in China, and as official exporting agent of Fast tranmission (Joint venture with Caterpillar AT tranmission), Dongfeng Dana axle and Komman air suspension, DuraMac provides one-stop solutions covers from pre-design to components supply, from installation to commissioning, from pre-sales communication to after-sales service support. For more information of our automotive power system products, you are welcome to visit DuraMac homepage:

Modifiable Components of DCEC ISF2.8s4148T Automotive Engine

Air Intake System1. Installation Position of Air FilterExhuast System1. Can Modify Installation Position and Direction of
2. Upgrade to  Heavy-Duty Type Air FitlerTurbocharger
3. N/A2. Water-Cooled Exhuast manifold
4. N/A3. Water-Cooled Turbocharger
Fuel System1. Upgrade to Fuel Fitler That Integrated with Fuel TransferStarting System1. 12V Starter Motor For 12v Electric System
Pump and Fuel Pre-Hearter2. Upgrading to Specified Brand and Speicifications of
2. N/AStarter Motor
Charging System1. 12V Charging Alternator for 12v Electric SystemEngine Shut-Down System1. 12V Solenoid for 12v Electric System
2. Explosion-Proof Charging Alternator2. Explosion-Proof Solenoid
3. Upgrading to Specified Brand And Speicifications of3. N/A
Charging Alternator4. N/A
Lubricating System1. Oil Pan PositionCooling System1. Can Modify Engine Fan Into Blower Fan or Suction Fan
2. Number of Dipstick2. Can Modify Central Position of Engine Cooling Fan
3. Position of Dipstick Can Choose From 6 Positions3. Can Choose Type of Engine Fan From Mechanical Type or
4. Can Modify Oil Filter to be Remote InstallationElectric Type
Power Output System1. Can Modify Size of Flywheel Housing and Flywheel.Engine Mounting System1. Can Modify Engine Mouting Bracket.
2. Dual-Ear Flywheel Housing (for Twin-Starter System)2. N/A
3. Some of Models Can Modify Flywheel Housing Into PTO3. N/A
Integrated Type.4. N/A
4. Engine Have Connecting Port of PTOs, That Able to5. N/A
Provide Power Output.6. N/A
Engine Auiliary Accessories1. All of Auxiliary System Can Choose Specified Brands and
2. Additional Auxiliary Systems Can be Added for Special

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

The picture of Sale Manual showing the accessories and scopes of supply.

Engine Sale Manual

The picture of Installation Drawing showing the accessories and scopes of supply.

Installation Drawing

The picture of Installation Manual showing the accessories and scopes of supply.

Installation Manual

The picture of Operation Manual showing the accessories and scopes of supply.

Operation Manual

The picture of Engine Parts Catalogue showing the accessories and scopes of supply.

Parts Catalogue

The picture of Test Report and Certifcate showing the accessories and scopes of supply.

Report & Certifcate

WhatsApp Online logo

Sales Team

Marine Service - SeaMacWhatApp-Icon

Automotive Service - DuraMacWhatApp-Icon

Industrial Service - ConeMacWhatApp-Icon

Generator Service -SinoGenWhatApp-Icon

Pump Service - PumpMacWhatApp-Icon

Parts Service - PartMacWhatApp-Icon

Sales Manager - Mrs. Wendy Fu

Sales Director - Mr. Jasper Lee       WhatApp-Icon

Shipping Service

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest