Rated Power: 220 HP @ 2200 RPM
Maximum Torque: 950 N·m @ 1400 RPM
Fuel System: Weifu PW2000 / RSV Mech.
Aspiration: TC & Air-Air Intercooler
Emission Standard: N / A
DCEC 6LTAA8.9 Industrial Engine
DCEC 6LTAA8.9 series Industrial engine is a 6-cylinders in line, 8.9 liter four-strokes engine with 114mm bore and 145mm stroke. DCEC 6LTAA8.9 series Industrial engine equipped with Weifu (or BYC) fuel pump and provides both mechanical governor and electronic governor for customers to choose from. The prime power range of is 178 HP to 360 HP.
To achieve different output, DCEC 6LTAA8.9 series Industrial engine have three configurations which are turbocharged engine, turbocharge with water-air intercooler, turbocharge with air-air intercooler. In the detailed model name, code T means engine come with turbocharger, code single A means engine comes with water-air intercooler, and code double A means engine comes with air-air intercooler. As part of EMAC, ConeMac provides industrial power pack solution that integrated with air intake, air exhaust, cooling system, control system, transmission and hydraulic accessories, We also supplying special products such as explosion proof engine, generator and water pump set, as well as ultra-low temperature condition engine power pack. We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.
DCEC 6LTAA8.9 series electronic industrial engine can reach upto EU Stage V emission standard, the number 30/40/50 are the emission standard mark of engine, which means engine emission standard are EU Stage III, IV, V. For different emission standard DCEC 6LTAA8.9 series electronic industrial engine, the engine itself are the same, the major different of different emission standard engine models are the after-treatment system and ECU program, EMAC will keep updating products introduction page of different emission standard engine models, welcome to subscribe our website to get latest update information.
If you are in need of engine model that not available on our website for the moment, please contact EMAC sales team for technical details and related documents, our well trained sales and engineering team will help you with all products and techical documents available here at DCEC.
Advantages of 6LTAA8.9 Industrial Engine
1. Through the optimization of the control strategy and the actual use of the equipment, the fuel economy is further improved.
2. The advanced product platform and optimized design make the economic fuel consumption area of the engine wider, which is about 5-8% less fuel than the same type of engine.
3. Longer equipment maintenance cycle up to 400 hours.
4. The failure rate is low, the average maintenance time and cost are about half of the same type of engine, and the working time is longer.
DCEC 6LTAA8.9 Series Industrial Engine
This is the list of all series of DCEC 6LTAA8.9 Series Industrial Engine.
Click here to find industrial engines by type (Fuel System & Emission Standard).
DCEC 6LTAA8.9-C240 Industrial Engine
Rated Power: 240 HP @ 2200 RPM
Maximum Torque: 1180 N·m @ 1400 RPM
Fuel System: Weifu PW2000 / RSV Mech.
Aspiration: TC & Air-Air Intercooler
Emission Standard: N / A
DCEC 6LTAA8.9-C300 Industrial Engine
Rated Power: 300 HP @ 2000 RPM
Maximum Torque: 1268 N·m @ 1000 RPM
Fuel System: Weifu PW2000 / RSV Mech.
Aspiration: TC & Air-Air Intercooler
Emission Standard: N / A
DCEC 6LTAA8.9-C325 Industrial Engine
Rated Power: 320 HP @ 2200 RPM
Maximum Torque: 1230 N.m @ 1400 RPM
Fuel System: Bosch P7100 / RQV-K Mech.
Aspiration: TC & Air-Air Intercooler
Emission Standard: N / A
DCEC 6LTAA8.9-C360 Industrial Engine
Rated Power: 354 HP @ 2200 RPM
Maximum Torque: 1400 N·m @ 1400 RPM
Fuel System: BYC P7100 / RSV Mech.
Aspiration: TC & Air-Air Intercooler
Emission Standard: N / A