Select Page

4BTA3.9-C100-II Pump Drive Engine

DCEC 4BTA3.9-C100-II pump drive engine is a 4-cylinders in line, 3.9 liters four-strokes engine with 102 mm bore and 120 mm stroke. Equipped with BYC PB fuel pump and RSV governor, comes with turbocharger.

The prime power at 2200 RPM of DCEC 4BTA3.9-C100-II pump drive engine is 74 kW.

As part of EMAC, PumpMac provides abundant premium pump-driven power pack options, WPT PTO, Advance gearbox and pump head, as well as customized water pump set. We also have a set of NFPA20 standard engine power pack accessories including air intake shut-off valve, DC contactor, engine control panel, jacket water heater etc.

We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

Advantages of 4BTA3.9-C100-II Pump Engine

  • Advanced design and sophisticated manufacturing, adapt to various harsh working conditions, high strength, strong ability to work under heavy loads.

  • CMS adopts advanced design and precise manufacturing technology, which reduces fuel consumption by 20 % compared with similar domestic products.

  • Manufacturing process: The cylinder block and cylinder head adopt integrated design, which eliminates the occurrence of engine water leakage and oil leakage.

  • Good reliability The integrated design of cylinder block and cylinder head prevents water and oil leakage of the engine. There are 40 % fewer parts than the same type of engine, and the failure rate is greatly reduced.

  • The three-stage fuel filter ensures a balanced level of particle dispersion, protects the main components of the fuel system, and maximizes the life of the engine.

  • The cylinder bore adopts a platform mesh honing design. The perfect geometric structure effectively prevents oil leakage, and the use of advanced technology such as new piston ring components and gasket crimping and molding reduces oil loss.

Technical Specifications

Engine Model:4BTA3.9-C100-II
Engine Type:4 Cylinders, in Line
Displacement:3.9 L
Rated Speed:2200 RPM
Rated Power / Speed:74 kW @ 2200 RPM
Peak Torque:410 N.m @ 1500 RPM
Fuel System:BYC PB / RSV Mechanical Governor
Aspiration Method:Turbocharged & Water-AirIntercooler
Emission Standard:Euro Stage II
Bore * stroke:102 mm * 120 mm
Packing Size(L * W * H):778 mm * 753 mm * 882 mm
Dry Weight:355 kg
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C

Engine Model

Output Power

Torque

Fuel System

Aspiration

4BT3.9-P5036 kW @ 1500 RPM229 N.m @ 1500 RPMMechanical Pump  /  Electronical GovernorTurbocharged
4BT3.9-P5540 kW @ 1800 RPM212 N.m @ 1800 RPMMechanical Pump  /  Electronical GovernorTurbocharged
4BT3.9-C9066 kW @ 2900 RPMN/AMechanical Pump  /  RSV Mechanical GovernorTurbocharged
4BTA3.9-P8058 kW @ 1500 RPM369 N.m @ 1500 RPMDirect Injection  /  Electronical GovernorTurbocharged & Water-Air Intercooler
4BTA3.9-C80-II60 kW @ 2200 RPM360 N.m @ 1400 RPMMechanical Pump / Electronical GovernorTurbocharged & Water-Air Intercooler
4BTA3.9-P9067 kW @ 1800 RPM355 N.m @ 1800 RPMMechanical Pump / Electronical GovernorTurbocharged & Water-Air Intercooler
4BTA3.9-P9570 kW @ 1500 RPM446 N.m @ 1500 RPMMechanical Pump / RSV Mechanical GovernorTurbocharged & Water-Air Intercooler
4BTA3.9-C10074 kW @ 2200 RPM410 N.m @ 1500 RPMBYC PB  /  RSV Mechanical  GovernorTurbocharged & Water-Air Intercooler
4BTA3.9-C100-II74 kW @ 2200 RPM410 N.m @ 1500 RPMMechanical Pump / Electronical GovernorTurbocharged & Water-Air Intercooler
4BTA3.9-C10578 kW @ 2900 RPMN/AMechanical Pump / RSV Mechanical  GovernorTurbocharged & Water-Air Intercooler
4BTA3.9-P11080 kW @ 1800 RPM424 N.m @ 1800 RPMBYC PB / RSV Mechanical  GovernorTurbocharged & Water-Air Intercooler
4BTA3.9-C110-II82 kW @ 2200 RPM460 N.m @ 1500 RPMWeifu PW2000 Pump / RSV Mechanical  GovernorTurbocharged & Water-Air Intercooler
4BTA3.9-C12593 kW  @ 2200 RPM404 N.m @ 2200 RPMWeifu PW2000 Pump / RQV-K GovernorTurbocharged & Water-Air Intercooler
4BTA3.9-C125-II93 kW @ 2200 RPM475 N.m @ 1500 RPMWeifu PW2000 Pump / RQV-K GovernorTurbocharged & Water-Air Intercooler
4BTA3.9-C130-II97 kW @ 2200 RPM475 N.m @ 1500 RPMWeifu PW2000 Pump / RQV-K GovernorTurbocharged & Water-Air Intercooler
4BTAA3.9-C8060 kW @ 2200 RPM385 N.m @ 1300 RPMBYC P7100 Pump  /  RSV Mechanical  GovernorTurbocharged & Water-Air Intercooler
4BTAA3.9-C11082 kW @ 2200 RPM500 N.m @ 1400 RPMWeifu PW2000 Pump / RSV Mechanical  GovernorTurbocharged & Air-Air Intercooler
4BTAA3.9-C11587 kW @ 2200 RPM530 N.m @ 1300 RPMWeifu PW2000 Pump / RSV Mechanical GovernorTurbocharged & Air-Air Intercooler
4BTAA3.9-C125-II93 kW @ 2300 RPM530 N.m @ 1400 RPMBYC P7100 Pump / RSV Mechanical GovernorTurbocharged & Air-Air Intercooler
4BTAA3.9-C13097 kW @ 2500 RPM519 N.m @ 1400 RPMBYC P7100 Pump / RQV-K GovernorTurbocharged & Air-Air Intercooler
——END——

General Infomation of DCEC 4BTA3.9-C100-II Pump Engine

Engine Model4BTA3.9-C100-IIAdvertised Power74 kW @ 2200 RPM
Peak Torque410 N.m @ 1500 RPMCurve & DatasheetFR93933
Compression Ratio17.3 : 1No. Of Cylinders4 Cylinders
AspirationTurbocharged & Water-AirIntercoolerDisplacement3.9 L
Bore * stroke102 mm * 120 mmCPL Code Revision2093
 Fuel SystemBYC PB / RSV Mechanical GovernorApplicationN/A
Dry Weight355 kgBasic Engine(L * W * H)778 mm * 753 mm * 882 mm
Emission StandardEuro Stage II

Installation Data of DCEC 4BTA3.9-C100-II Pump Engine

Center Of Gravity. Distance From Front Face Of Block391 mm
Center Of Gravity. Distance Above Crank Centerline(Above Crankshaft)160 mm
Instantaneous Inertia At Rotating: (Without Flywheel)0.143 kg.m2
Maximum (Static) Bending Moment at Front Support Mounting Surface435 N.m
Maximum (Static) Bending Moment Allowed for Side-Mounted BossN/A
Maximum (Static) Bending Moment at Rear Face of Block1356 N.m
Moment of Inertia of Complete Engine— Roll Axis11.1 kg.m2
Moment of Inertia of Complete Engine— Pitch Axis19.1 kg.m2
Moment of Inertia of Complete Engine— Yaw Axis14.7 kg.m2
Maximum Crankshaft Thrust Bearing Load Limit-Intermittent Load3425 N
Maximum Crankshaft Thrust Bearing Load Limit-Continuous Load1112 N

Performance Data of DCEC 4BTA3.9-C100-II  Pump Engine

Minimum Idle Speed900 RMP
Maximum Speed Adjustment Speed (10% Rated Load)2460 RMP
Maximum Overspeed Performance3750 RMP
Maximum Altitude Limit Restriction—Continous2200 m
Maximum Torque Available at Closed Throttle Low Idle Speed120 N.m
Governor Regulation8 %
Throttle Handle Angle – High Idle94 ± 10° Deg
Throttle Handle Angle – Low Idle68 ± 10° Deg
Throttle Handle Angle – Rotation Angle26 ± 5° Deg
Throttle Angle at Engine Shutdown—Engine Work340 ± 5° Deg
Throttle Angle at Engine Shutdown—Engine Shutdown42 ± 5° Deg
——END——

Engine Performance Data Rated power of DCEC 4BTA3.9-C100-II Pump Engine

Rated PowerTorque PeakRated PowerTorque Peak
Engine Speed2200 RPM1500 RPMIntake Air Flow170 litre101 litre
Output Power74 kW64 kWExhaust Gas Flow420 litre275 litre
Torque321 N.m410 N.mExhaust Gas Temperature470 ℃540 ℃
Friction Horsepower N/AN/AHeat Rejection to AmbientN/AN/A
Intake Manifold Pressure118 kPa78 kPaHeat Rejection to CoolantN/AN/A
Supercharger Outlet Pressure N/AN/ASteady State Smoke1.5 FSN2.0 FSN
Turbo Comp. Outlet Temperature 132 ℃100 ℃

Performance-Curve-DCEC-Cummins-4BTA3.9-C100-II-Pump Engine

System Technical Data of DCEC 4BTA3.9-C100-II Pump Engine

Exhaust SystemMaximum Exhaust Back Pressure10 kPa
Exhaust Pipe Size Normally Acceptable75 mm
Maximum Static Support Weight of Turbocharger Outlet Flange13.5 N.m
Exhaust Manifold Insulation AcceptableNo
Turbocharger Insulation AcceptableNo
Air Intake SystemMaximum Intake Air Restriction with Heavy Duty Air Cleaner— Clean Element4 kPa
Maximum Intake Air Restriction with Heavy Duty Air Cleaner— Dirty Element6 kPa
Minimum Dirt Holding Capacity with Heavy Duty Air Cleaner53 g/cfm
Maximum Temperature Rise from Ambient to the Inlet of the Turbocharger17 ℃
Maximum Allowable Inlet Pressure DropN/A
Lubrication SystemNormal Operating Oil Pressure Range69-345 kPa
Maximum Lube Oil Flow for Engine Accessories4 litre / min.
Maximum Sump Oil Temperature127 ℃
Minimum Required Lube System Capacity – Sump plus Filters9.0 litre
By-pass Filtration RequiredNo
Sump Inclination Angle— Front Up45°
Sump Inclination Angle— Front Down45°
Sump Inclination Angle— Side to Side45°
Cooling SystemCoolant Capacity – Engine Only8.3 litre
Maximum External Engine Cooling Cycle Resistance34 kPa
Minimum Pump Inlet Pressure with Open Thermostat and no Pressure CapN/A
Maximum Static Head of Coolant Above Engine Crankshaft CenterlineN/A
Standard (Modulating) Thermostat Range82-93 ℃
Maximum Block Coolant Pressure with Closed Thermostat and no Pressure CapN/A
Minimum Pressure Cap Pressure50 kPa
Maximum Engine Outlet Temperature100 ℃
Minimum Engine Coolant Temperature71 ℃
Minimum Fill Rate19 litre
Maximum Initial Fill Time5 min
Minimum Coolant Expansion Space6 %
Maximum Deaeration Time25 min
Minimum Drawdown of Total System Capacity11 %
Fan-on Engine Coolant Outlet Temperature93 ℃
Shutter Opening Coolant Outlet Temperature85 ℃
Engine Intake Manifold Air Temperature when Shutter Open66 ℃
Cool Start SystemMinimum Battery Capacity-Cold Soak-18°C or Above, Engine Only – Cold Cranking Amp.800 CCA (12 V)  400 CCA(24 V)
Minimum Battery Capacity-Cold Soak-18°C or Above, Engine Only – Reserve Capacity160 min (12 V)   80 min (24 V)
Minimum Ambient Temperature for Unaided Cold StartN/A
Minimum Ambient Temperature without Auxiliary Cold Start0 (12 V)  32 (24 V)
Minimum Cranking Speed Required for Unaided Cold Start125 RPM
Starter PowerN/A
Fuel SystemMaximum Fuel Flow of Oil Pump193 kg/hr
Maximum Oil Intake Resistance-Clean Fuel Filter14 kPa
Maximum Oil Intake Resistance-Dirty Fuel Filter27 kPa
Maximum Oil Flow Resistance-With Check ValveN/A
Maximum Oil Flow Resistance-No Check Valve68 kPa
Maximum Fuel Inlet Temperature71 ℃
Minimum Tank Bleed Performance at 6 "Water Column Pressure340 litre
——END——

Note: All Above Data are Just for Reference, All Data Might Change Without Notices or Updates, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

What's the Standard Scopes of Supply?

With full ranges of emission standard from Euro 2 to Euro 7, Dongfeng Cummins producing 12 series pump engines, started from 3.9 liter engine, to 15 liter engine, covering the power range of 125HP to 650HP.
Dongfeng Cummins pump engine customize developing configurations for big vehicle OEMs in China, based on each of requirement, Dongfeng Cummins producing dozens of different configuration engines with same engine model number, which only SO-Shop Order will be different with each other, the SO number is the identify number of the engine configuration of each model.
Even with same engine model, different SO number engine can have very different configuration with each other, with different prices. Some of SO-Shop Order is not available for commercial market, such as restricted models (Usually for military specifications).
EMAC offering most common, cost effective models which also able to process the production in Dongfeng Cummins, which usually have following accessories as standard configuration.

Scopes of Supply of DCEC Pump Drive Engine

Air Intake System1. Air Intake Manifold Exhuast System1. Exhuast Manifold
2. Water-Air Intercooler2. Turbocharger
3.Air Filter3. Exhuast Elbow
     
Starting System1. Starter Motor Charging System1. Charging Alternator
2. Starter Rely2. N/A
Lubricating System  Fuel System 
  1. Electronic Fuel Transfer Pump
1. Oil Pump 2. Common Rail Fuel System
2. Oil Filter3. Fuel Filter
 4.Ecu & Wiring Harness
  
Engine Auiliary Accessories1.N/A Power Output System1. Flywheel
2. N/A2. Standard Flywheel Housing
     
Control System1. Ecu Socket And Sensors Engine Mounting System1. Engine Mouting Bracket
     
Cooling System1. Water Pump   
2. Engine Fan 
3. Standard Radiator 
------END------

What's the Available Optional Items?

Dongfeng Cummins only provides customize service for the large quantity orders or large OEMs, which means usually the order quantity are higher than 1000 units. For the small quantity engine project, EMAC provides customize services with our own resource and engineer team.
EMAC have rich experience on the customize developing, which provides abundant optional items based on the requirement of each project. The typical optional items are special Prestolite charging alternator, prestolite starter motor, Knorr Air compressor. Valeo air conditioning compressor, ECU output socket set, engine accelerate pedal etc.

Optional Accessories of DCEC Pump Drive Engine

Air Intake System1. Air Intake Pre-heater Exhuast System1. Muffler & Bellows
2. Air Intake Pre-Filter2. Flame Trap
3. Air Filter Alarm System3. Spark Arrestor Type Muffler & Bellows
4. Air Intake Shut-off Valve4. DPF System
Fuel System1. Coarse Filter Engine Auiliary Accessories1. Hydraulic Oil Pump
2. Fuel Pre-Heater 2. Air Compressor
Starting System1. Manual Magnetic DC Contactor Cooling System1. Silent Type Radiator
2. Dual ears flywheel housing 2. Plateau Radiator
3. Spring Starter Motor 3. Salt-Spray Resistant Radiator
4. Air Starter Motor 4. Coolant Pre-Heater
5. Hydraulic Starter Motor 5. Jacket Water Heater
6. Extra Electric Starter Motor 6. N/A
7. Remote starting function 7.N/A
8. Lock protection function of starter motor 8. N/A
9. Manual Magnetic DC Contactor 9. N/A
Power Output System1. Clutch Control System1. Engine Monitor
2. Add Gearbox for Higher Output Speed 2. NFPA20 Standard Engine Control Box
3. N/A 3. NFPA20 Fire Fighting Pump Set Control Panel
Lubricating System1. Oil Pre-Heater Engine Mounting System1. Shock Absorber Pad
------END------

As part of EMAC, PumpMac focusing on water pump set related business, from pump drive engine, to WPT PTO, from complete engine power pack to complete water pump set, from NFPA20 standard fire fighting pump accessories to fire pump drive package, from explosion proof accessories to complete explosion-proof water pump set, PumpMac provides professional one-stop solution for everything customer needed for water pump set industry.
For more information of our pump drive power pack and complete water pump set products, you are welcome to visit PumpMac homepage: www.pumpmac.com

What's the Modifiable Items and Scopes?

As explained in the standard scopes of supply, Dongfeng Cummins not able to provide customize developing for small quantity projects or small OEMs, so EMAC helps SME OEMs to provide customize services, not only providing additional optional items, but also provides customize modification services to meet their requirements based on the exisiting engine SO number.
As flexible service ability is our core advantages, EMAC is very experienced and good at providing customize services, the common customize services are as below:
1: AIr Intake System: Change the air intake direction.
2: Air Exhuast System: We are able to change the turbocharger direction as the interaction on installation could be occured, also change change the air exhuast direction.
3: Lubricating System: Modify lubricating system is one of the most common requirement from customer, we can provide flat-type engine oil pan, to lower down total engine height, which usually required for special vehicles. For the standard engine oil pan, we also can change the direction of the engine oil pan.
4: Cooling System: There are lots of options for the engine cooling system, for the engine fan, we can provide customize for the material of engine fan (plastic fan or steel fan), wind direction of the engine fan (blower fan or suction fan ) and types of engine fan (mechanical fan or electric control fan).
5: Power Output System: Most of electronic controlled Dongfeng Cummins pump engines are comes with SAE#1 flywheel housing now, while lots of customers need SAE#2 flywheel because of the housing of transmissio is SAE#2, so we have to provide customzie services for those customer, which need to modify flywheel housing, flywheel and starter motor, we also have PTO integrated type flywheel housing available, which can output the whole power of the engine from the PTO on the flywheel housing, we can also provide modification of the mounting side of the starter motor.
6: Electric System: All of Dongfeng Cummins engines are comes with standard 24V electric system, while some customer need to modify the electric system into 12V, we can also modify the starter motor and alternator into appointed brand or appointed specifications.
EMAC is your reliable professional power system partner, feel free to contact our services team to get detailed information about our standard scopes of supply, optional items and modifiable parts for our Dongfeng Cummins pump engine, we are ready to explore the journey of our cooperation.

How to Order Engine to Replace Your Old Engine?

There are three types of engine replacements demand, type A is to replace the old Dongfeng Cummins engine, the original engine is produced by Dongfeng Cummins, type B is to replace Cummins engine produced in other countries including UK, USA, Mexico, India or Japan Komatsu Cummins, type C is to replace other brands engine or even gasoline engines with Dongfeng Cummins produced engines. The detailed introduction and replacement process are as below:
Type A: Engine Replacement Requirement (Original Engine is Dongfeng Cummins Engine).
This is most simple demand case, you just need to provide us the original engine name plate, and then we can easily check and confirm what exactly you need, and we also ensuring that the engine from us will be 100% same with your original engine. (In some case that the vehicle manufacturing modify the engine on their own, we are not able to supply the parts or the condition that modified by the vehicle manufacturer)
Type B: Engine Replacement Requirement (Original Engine is Cummins Engine but produced in UK, USA or other Cummins engine plant).
EMAC have rich experiences in replace the UK, USA or other engine plant produced engine, with Dongfeng Cummins produced Cummins engines, we required the original engine name plate photo to obtain the related information (at least we will need engine serial number, with engine model name only is useless for us, we are not able to provide quotation with engine model name only for the replacement project), and then we can check out the BOM list and all accessories of your original engine serial number, and then we can check and compare with the BOM list of our Dongfeng Cummins produced engine, choose the most closest SO number engine, and modify the parts that not same with your original engine, we have delivered hundreds of cases of replace the customer's original engine that produced in Cummins UK, USA or other engine plants with Dongfeng Cummins produced engines, you can refer to our video introduction on Youtube: https://youtu.be/dYVgRM5NsUo
We can NOT guarantee the engine produced by Dongfeng Cummins is exactly same with your original engine, but we can guarantee that all of engines from EMAC will have no problem with installtion and performance, which all of engines can works very well after replacement.
Type C: Engine Replacement Requirement (Original Engine is other brnad engines even gasoline engines).
EMAC also have rich experiences in replace the engine that not Cummins installed, these engines can be other brands such as Deutz, Caterpillar, Perkins, Komatsu or others, we even had experiences of replace gasoline engine with Dongfeng Cummins produced diesel engines.
This kind of appliaction is more complex and quite risky, EMAC can't do much thing due to lacking of information, the only thing we can guarantee is the performance after replacement, we check and compare the engine performance curve of original engine and our Dongfeng Cummins engine, and then we select the most suitable model for replacement. Due to we are lacking of the installation spaces and related accessories, we will send the both CAD and 3D drawing for our recommend engine model, and then customer have to evaluate the risky of replace the original engine with our engine, especially the risky of space, the possibile interactive when installation, and the risky of modify related coolant pipe, air pipes and wiring harness. Normally this kind of request consuming lots of energy and resource for us to carry on, also quite risky for us, so we will not work on the replacement quantity that below 50 units.
When your requirement is replacement, please tell our customer service team of what type of replacement you need, and provide us original engine name plate, the engine name plate is the necessary material before we start our business negotiations, we will NOT reply to all inquiry that even can't provide engine name plate.

How to Choose the Right Dongfeng Cummins Pump Engine for You?

To choose a suitable engine for truck, bus or special vehicle manufacturer is quite simple, because the buyer is the manufacturer, so usually they are quite flexible with space, pipes and wiring connections.
The following process are the standard process for us to select a suitable engine model for truck, bus or special vehicle manufacturer demand.
Step 1: We need basic information of the required engine, including rated power, rated speed and emission standard of the required engine.
Step 2: EMAC will evaluate the requirement and select the suitable engine model for customer, with engine data sheet, engine performance curve, CAD darwing, 3D model and budgetary quotation provided back to customer.
Step 3: Customer should check and compare the engine data sheet, performance curve and related drawing and confirm all details one by one. Most important thing is confirm the performance curve suitable for the requirement.
Step 4: After engine confirmed, we have to check and confirm the specifications of accessories one by one carefully, like the electric system specifications (12V or 24V), the detailed specifications of starter motor, charging alternator, air compressor, power steering pump, A/C compressor etc.
Step 5: Confirming the accessories positions and connections, customer need to check and confirm all positions are suitable for the project, such as engine fan, turbocharger, oil pan position, and connections of air pipe, coolant pipe, wiring harness etc.
Step 6: After confirming the engine performance, position, connection and specifications of all accessories, we will be able to provide accurate quotation for prototype and batch order. Prototype is strongly recommend to start the cooperation, to avoid the possible problem, risky on the engine with batch order.
Notes:
1: Technical support including technical training, onsite installation and commissioning services are avaiable with additional chargers.
2: We are able to supply complete powertrain system, including engine, transmission, transfer, axle, suspension etc, engine with transmission is highly recommended, because if we supply both engine and transmission, we can run simulations for the vehicle, which we usually will provide customer a simulation report, with the simulated result of Balanced Maximum Vehilce Speed and Maximum Grade Ability at different speed.
3: EMAC able supply complete chassis that integrate all powertrain system together, which can greatly reduce the manufacturer's design works and reduce the system mismatching risky.

Tips of Dongfeng Cummins Pump Engines!

Dongfeng Cummins is one of 50:50 joint venture of Cummins in China, its official Cummins factory that following high Cummins USA production and quality control standard, the Dongfeng Cummins factory swap every 5 years between appointed employee from Dongfeng Motor and Cummins. For more details, you can refer to the company introduction of DCEC-Dongfeng Cummins Engine Company.


Started the production of Cummins engines in China in 1980s, Cummins products has been in China for over 40 years, thousands of people have worked for Cummins China and some of them are very skilled experienced engineer, some of them resigned from Cummins to set up their own small workshops or assembly factories that focusing on producing copy Cummins engines.

Price is always not the problem for Chinese suppliers, there are many tickies to lower down the engine prices, such as supply self-rebuild engine as new engine, supply official RECON engine from Cummins as brand new engine, assembly the fake engine with after-market parts, supply lower power model engine and change the name plate etc. You can find plenty of suppliers on alibaxx.com with various prices, the classic Chinese business style is tell you that he give you very low price and not make profit, how can you believe a businessman will make business that have no profit? They gave you low price not becuase they share their profit to you?
As a matter of fact, Chinese supplier often make their profit much more higher by selling the low quality copy products as genuine brand new products! Always remember YOU GET WHAT YOU PAID!
The key point of dealing with Chinese supplier, is to find and choose reliable business partner that will not cheat you for short-term business, but with vision of build long-term career and life-time partnership, EMAC is one of the reliable partner that not chasing for short-term high profit, but we cares our decades of good reputation and we working with all business partners not as supplier and customers, but as close friend and brothers.

FAQ of Dongfeng Cummins Pump Engines?

1: What mean by DCEC?
DCEC is the short name of Dongfeng Cummins Engine Company, take the first letter of each word, it comes with DCEC as short name, for more details about DCEC, you can refer to the company introduction of DCEC-Dongfeng Cummins Engine Company.

2: Does your engines copy products?
This question is quite often from customer that not familiar with Cummins, Cummins have over 20 joint ventures in China now, and 6 of them are engine joint venture, which Cummins owns 50% share of all of those 6 engine plants, so all of the Cummins factories in China are genuine Cummins factory, that following high Cummins USA production and quality control standard. EMAC is the business partner of DCEC, and we are supplying powertrain and engine power pack based on genuine brand new engines from Dongfeng Cummins for all different applications, EMAC is a reliable and professional power system solution provider that offering abundant various options.
3: Why there are so many companies selling Cummins engines?
There are plenty of companies selling Cummins engines in China, especially on the B2B platform, such as alibaxx.com, you can find plenty suppliers there with attractive prices, Cummins products has been in China for over 40 years, thousands of people have worked for Cummins China and some of them are very skilled experienced engineer, some of them resigned from Cummins to set up their own small workshops or assembly factories that focusing on producing copy Cummins engines. You should be careful of being cheated by the attractive prices with copy or rebuild products.
4: How can I identify if the engine genuine or not?
Cummins keep working on the updating its identification system, technically, there are serial number on all key components of Dongfeng Cummins engines, including cylinder block, cylinder head, turbochager, fuel pump, starter motor, alternator, you can collecting the serial number (NOT part number), and then call DCEC call service center to identify if all the numbers are matching to the original number or not. EMAC continuously updating the latest Cummins identification system, you are welcome to following our website or keep in touch with our customer services team to get latest information from Cummins.
5: What's the warranty policy for the engines supplied by EMAC?
EMAC following standard Dongfeng Cummins warranty policy, which will update sometimes, you can following us to get the latest warranty policy from Dongfeng Cummins. Generally EMAC only afford the defective parts cots and shipping costs for the warranty claims, labor costs and transportation costs are not covered in the warranty.
However, EMAC is building our own independant after-sales service system now, which aims to build a global service network, with resouces of global repair and engineering network, which we believe can bring all business partner benifit in future, helping all of OEM manufacturers expanding their market into global market without worries of lacking after-sales service network. For more details about our Global Service, you can visiting www.global-service.com.
6: How about the future parts supply for the engines? Are you able to supply parts?
As the support team of EMAC's business scope, PartMac is our own brand that focusing on genuine parts directly from all brand factories.
All of EMAC’s partners are facing big challenges with sourcing original spare parts in China. Committed to providing truthworthy and professional after-sales support and parts supply, PartMac is a sub-brand of EMAC group that focusing on parts business. Stick to original parts only, PartMac can’t give any solution on CHEAP PARTS, but you don’t need to worry about any quality issues with every single parts from PartMac.
WhatsApp Online logo

Sales Team


Marine Service - SeaMacWhatApp-Icon

Automotive Service - DuraMacWhatApp-Icon

Industrial Service - ConeMacWhatApp-Icon

Generator Service -SinoGenWhatApp-Icon

Pump Service - PumpMacWhatApp-Icon

Parts Service - PartMacWhatApp-Icon

Sales Manager - Mrs. Wendy Fu

Sales Director - Mr. Jasper Lee       WhatApp-Icon


Shipping Service

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-engine.com

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest