Select Page

6LTAA8.9 Industrial

DCEC 6LTAA8.9 series Industrial engine is a 6-cylinders in line, 8.9 liter four-strokes engine with 114mm bore and 145mm stroke. DCEC 6LTAA8.9 series Industrial engine equipped with Weifu (or BYC) fuel pump and provides both mechanical governor and electronic governor for customers to choose from. The prime power range of is 178 HP to 360 HP.
To achieve different output, DCEC 6LTAA8.9 series Industrial engine have three configurations which are turbocharged engine, turbocharge with water-air intercooler, turbocharge with air-air intercooler. In the detailed model name, code T means engine come with turbocharger, code single A means engine comes with water-air intercooler, and code double A means engine comes with air-air intercooler. As part of EMAC, ConeMac provides industrial power pack solution that integrated with air intake, air exhaust, cooling system, control system, transmission and hydraulic accessories, We also supplying special products such as explosion proof engine, generator and water pump set, as well as ultra-low temperature condition engine power pack. We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.
DCEC 6LTAA8.9 series electronic industrial engine can reach upto EU Stage V emission standard, the number 30/40/50 are the emission standard mark of engine, which means engine emission standard are EU Stage III, IV, V. For different emission standard DCEC 6LTAA8.9 series electronic industrial engine, the engine itself are the same, the major different of different emission standard engine models are the after-treatment system and ECU program, EMAC will keep updating products introduction page of different emission standard engine models, welcome to subscribe our website to get latest update information.
If you are in need of engine model that not available on our website for the moment, please contact EMAC sales team for technical details and related documents, our well trained sales and engineering team will help you with all products and techical documents available here at DCEC.

Advantages of 6LTAA8.9 Industrial Engine

1. Through the optimization of the control strategy and the actual use of the equipment, the fuel economy is further improved.
2. The advanced product platform and optimized design make the economic fuel consumption area of the engine wider, which is about 5-8% less fuel than the same type of engine.
3. Longer equipment maintenance cycle up to 400 hours.
4. The failure rate is low, the average maintenance time and cost are about half of the same type of engine, and the working time is longer.

6LTAA8.9 Mechanical Industrial Engine

All models of DCEC 6LTAA8.9 Mechanical Industrial Engine

6LTAA8.9-C220 Industrial Engine

6LTAA8.9-C220 Industrial Engine

DCEC 6LTAA8.9-C220 Industrial engine is a 6-cylinders in line, 8.9 liter four-strokes engine with 114 mm bore and 145 mm stroke. Equipped with Weifu PW2000 pump and RSV governor, engine comes with turbocharger and Air-Air Intercooler. The prime power at 2200 RPM of...

6LTAA8.9-C240 Industrial Engine

6LTAA8.9-C240 Industrial Engine

DCEC 6LTAA8.9-C240 Industrial engine is a 6-cylinders in line, 8.9 liter four-strokes engine with 114 mm bore and 145 mm stroke. Equipped with Weifu PW2000pump and RSV governor, engine comes with turbocharger and Air-Air Intercooler. The prime power at 2200 RPM of...

6LTAA8.9-C300 Industrial Engine

6LTAA8.9-C300 Industrial Engine

DCEC 6LTAA8.9-C300 Industrial engine is a 6-cylinders in line, 8.9 liter four-strokes engine with 114 mm bore and 145 mm stroke. Equipped with Weifu PW2000 pump and RSV governor, engine comes with turbocharger and Air-Air Intercooler. The prime power at 2000 RPM of...

6LTAA8.9-C325 Industrial Engine

6LTAA8.9-C325 Industrial Engine

DCEC 6LTAA8.9-C325 Industrial engine is a 6-cylinders in line, 8.9 liter four-strokes engine with 114 mm bore and 145 mm stroke. Equipped with BOCSH P7100 pump and RQV-K governor, engine comes with turbocharger and Air-Air Intercooler. The prime power at 2200 RPM of...

6LTAA8.9-C360 Industrial Engine

6LTAA8.9-C360 Industrial Engine

DCEC 6LTAA8.9-C360 Industrial engine is a 6-cylinders in line, 8.9 liter four-strokes engine with 114 mm bore and 145 mm stroke. Equipped with BYC P7100 pump and RSV governor, engine comes with turbocharger and Air-Air Intercooler. The prime power at 2200 RPM of DCEC...

WhatsApp Online logo

Sales Team


Generator Engine - Mr. Haden Wu

Marine Engine - Mrs. Hailey Tang

Automotive Engine - Mr. Vin Hu

Industrial Engine - Miss. Bella Huang

Pump Engine - Miss. Zora Zhou

Engine Parts-Miss. Nora

Sales Director - Mr. Jasper Lee      

Service Team


Technical Service - Mr. Vin Hu

Customer Service - Mrs. Wendy Fu

Contact EMAC Now!

10 + 13 =

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-engine.com

You have Successfully Subscribed!

Pin It on Pinterest