Select Page

6BTAA5.9-P180 Pump Engine

DCEC 6BTAA5.9-P180 pump drive engine is a 6-cylinders in line, 5.9 liters four-strokes engine with 102mm bore and 120mm stroke. Equipped with mechanical fuel pump and electronic governor, comes with turbocharger and Air-Air intercooler. The prime power at 1800RPM of DCEC 6BTAA5.9-P180 pump drive engine is 132 kW.

As part of EMAC, PumpMac provides abundant premium pump-driven power pack options, WPT PTO, Advance gearbox and pump head, as well as customized water pump set. We also have a set of NFPA20 standard engine power pack accessories including air intake shut-off valve, DC contactor, engine control panel, jacket water heater etc. We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

1.Compared with similar models, fewer parts and fewer operating failures significantly reduce the overall maintenance cost of the engine, and shorten the maintenance time by 50%.
2.Platform honing cross hatch cylinder hole, perfect geometric structure, effectively prevent oil leakage, advanced technology, such as new piston ring assembly and gasket crimping protection, reduce oil loss.
3.The intake air preheating device and the 6.6kW high-power starter greatly improve the cold start performance of the engine. Passed the -36°C test in the Arctic Village Mohe at extremely low temperatures.
4.The cylinder bore adopts a platform mesh honing design. The perfect geometric structure effectively prevents oil leakage, and the use of advanced technology such as new piston ring components and gasket crimping and molding reduces oil loss.
5.The size of the engine is smaller than that of the same type of engine, the maintenance space is large, and the maintenance is faster.
6.Strong interchangeability, more convenient equipment upgrades.

Technical Specifications

Basic Introduction of DCEC 6BTAA5.9-P180 Pump Engine

Engine Model:6BTAA5.9-P180
Engine Type:6 Cylinders, in Line
Displacement:5.9 L
Rated Speed:1800 RPM
Aspiration Method:Turbocharged & Air-Air Intercooler
Emission Standard:N/A
Fuel Consumption:28 kg/hr
Basic Engine(L*W*H):1015 mm * 725 mm * 990 mm
Dry Weight:432 kg
Lead Time:15-30 Working Days
Payment Terms:T/T ,L/C
DCEC Pump Drive Engine Introduction.620x350px

Engine Model

Output Power

Torque

Fuel System

Aspiration

6BT5.9-C125-II92 kW @ 2200 RPM540 N.m @ 1400 RPMBYC PB / RSV Mechanical GovernorTurbocharged
6BT5.9-P13096 kW @ 1500 RPM611 N.m @ 1500 RPMMechanical Pump / Electronical GovernorTurbocharged
6BT5.9-C13097 kW @ 2900 RPMN/AMechanical Pump / RSV Mechanical GovernorTurbocharged
6BT5.9-C130-II97 kW @ 2200 RPM560 N.m @ 1500 RPMBYC PB / RSV Mechanical GovernorTurbocharged & Water-Air Intercooler
6BT5.9-P160115 kW @ 1800 RPM610 N.m @ 1800 RPMMechanical Pump / Electronical GovernorTurbocharged & Water-Air Intercooler
6BTA5.9-C150-II112 kW @ 2200 RPM655 N.m @ 1500 RPMBYC PB / RSV Mechanical GovernorTurbocharged & Water-Air Intercooler
6BTA5.9-C165-II123 kW @ 2200 RPM694 N.m @ 1500 RPMBYC PB / RSV Mechanical GovernorTurbocharged & Water-Air Intercooler
6BTA5.9-C170125 kW @ 2900 RPMN/AMechanical Pump / RSV Mechanical GovernorTurbocharged & Water-Air Intercooler
6BTA5.9-C170-II127 kW @ 2000 RPM710 N.m @ 1300 RPMBYC PB / RSV Mechanical GovernorTurbocharged & Water-Air Intercooler
6BTA5.9-C180-II132 kW @ 2200 RPM750 N.m @ 1300 RPMWeifu PW Pump / RSV Mechanical GovernorTurbocharged & Water-Air Intercooler
6BTAA5.9-C13097 kW @ 2200 RPM580 N.m @ 1500 RPMBYC P7100 Pump / RQV-K GovernorTurbocharged & Water-Air Intercooler
6BTAA5.9-P160120 kW @ 1500 RPM764 N.m @ 1500 RPMMechanical Pump / Electronical GovernorTurbocharged & Air-Air Intercooler
6BTAA5.9-C160118 kW @ 2200 RPM670 N.m @ 1500 RPMWeifu PW2000 Pump / RSV Mechanical GovernorTurbocharged & Air-Air Intercooler
6BTAA5.9-C170 A125 kW @ 2200 RPM750  N.m @ 1400 RPMBYC P7100 Pump / RSV Mechanical GovernorTurbocharged & Air-Air Intercooler
6BTAA5.9-C170 B127 kW @ 2200 RPM750  N.m @ 1400 RPMBYC P7100 Pump  /  RSV  Mechanical GovernorTurbocharged  &  Air-AirIntercooler
6BTAA5.9-P180132 kW @ 1800 RPM700 N.m @ 1800 RPMMechanical Pump / Electronical GovernorTurbocharged & Air-Air Intercooler
6BTAA5.9-C180132 kW @ 2200 RPM770  N.m @ 1500 RPMBYC P7100 Pump / RQV-K GovernorTurbocharged & Air-Air Intercooler
6BTAA5.9-C190142 kW @ 2000 RPM800 N·m @ 1400 RPMBYC P7100 Pump / RSV Mechanical GovernorTurbocharged & Air-Air Intercooler
6BTAA5.9-C205153 kW @ 2000 RPM870 N·m @ 1400 RPMBYC P7100 Pump / RSV Mechanical GovernorTurbocharged & Air-Air Intercooler
——END——

General Infomation of DCEC 6BTAA5.9-P180 Pump Drive Engine

Engine Model6BTAA5.9-P180Output Power132  kW @ 1800 RPM
Torque700 N.m @ 1800 RPMNo. of Cylinders6 Cylinders
Compression RatioN/AAspirationTurbocharged & Air-Air Intercooler
Fuel SystemMechanical Pump / Electronical GovernorEmission CertificationN/A
Displacement5.9 LBore*Storke102 mm * 120 mm
Governor RegulationN/AApplicationWater Pump
Dry Weight432 kgCPL Code Revision3289
Basic Engine(L*W*H)1015 mm * 725 mm * 990 mm
——END——

Performance-Curve-DCEC-Cummins-6BTAA5.9-P180-Pump-Drive-Engine

Engine Performance Data of DCEC 6BTAA5.9-P180 Pump Drive Engine

Engine Speed1800 RPMOutput Power132  kW
Torque700 N.mInlet Air Flow135 L / s
Charge Air Flow628 kg / minExhaust Gas Flow628 kg / min
Exhaust Gas Temperature540 Heat Rejection to Coolant63  kW
Radiator Coolant Flow144 L / minHeat Rejection to Charge Air Cooler22 kW
Turbo Compressor Outlet Pressure145 kPaTemperature150
Fuel Consumption28 kg / hrLow Idle Speed800 ±50 RPM
Maximum  No Load Speed1890±20 RPMMaximum  Overspeed Capability(15sec max)2900 RPM
When 0% Gas Pedal Loading [email protected] RPMN/AMaximum  Altitude Limit for Continious RunningN/A
Minimum Pump Inlet PressureN/ACold Start Capability-Without Start Add Device-12
Cold Start Capability-With Air Intake Preheating-35 Maximum Parasitic Load at 0℃ @ 500 RPM Without AidN/A
Maximum Parasitic Load at -15 ℃ @ 500 RPM Without AidN/A
——END——

Scopes of Supply of DCEC 6BTAA5.9-180 Pump Drive Engine

Air Intake System1. Air intake manifoldExhuast System1. Exhuast manifold
2. Air filter2. Turbocharger
3. Water-AirIntercooler3. Exhuast elbow
Starting System1. Starter motorCharging System1. Charging alternator
2. Starter rely2. N/A
Lubricating System1. Oil pumpFuel System1. Fuel transfer pump
2. Oil filter2. High-pressure fuel pump
3. N/A3. Machanical governor
4. Fuel Filter
Engine Shut-Down System1. Engine fuel shut-off solenoidPower Output System1. Flywheel
2. N/A2. Standard flywheel housing
Cooling System1. Sea Water Pump & Heat Exchanger/ RadiatorEngine Mounting System1. Engine Mouting Bracket
——END——

Optional Accessories of DCEC 6BTAA5.9-P180 Pump Drive Engine

Air Intake System1. Air Intake Pre-heaterExhuast System1. Muffler & bellows
2. Air intake pre-filter2. Flame trap
3. Air filter alarm system3. Spark arrestor type Muffler & bellows
4.N/A4. DPF system
Fuel System1. Coarse FilterEngine Auiliary Accessories1. Hydraulic oil pump
2. Fuel pre-heater2. Hydraulic cluch
Starting System1. Manual Magnetic DC ContactorControl System1. Engine monitor
2. Dual ears flywheel housing2.Engine protection system with alarm system
3. Spring Starter Motor3. Machanical engine control lever syste
4. Air Starter Motor4. Electric engine control lever system
5. Hydraulic Starter Motor5. N/A
6. Manual Magnetic DC Contactor6. N/A
Power Output System1. Gear reduction gearboxCooling System1. Coolant pre-heater
2. Reverse gear box2. Jacket water heater
Lubricating System1. Oil pre-heaterEngine Mounting System1. Shock absorber pad
——END——

 

As part of EMAC, PumpMac focusing on water pump set related business, from pump drive engine, to WPT PTO, from complete engine power pack to complete water pump set, from NFPA20 standard fire fighting pump accessories to fire pump drive package, from explosion proof accessories to complete explosion-proof water pump set, PumpMac provides professional one-stop solution for everything customer needed for water pump set industry.
For more information of our pump drive power pack and complete water pump set products, you are welcome to visit PumpMac homepage: www.pumpmac.com

Modifiable components of DCEC 6BTAA5.9-P180 Pump Drive Engine

Air Intake System1. Installation position of air filterCharging System1. 12V charging alternator for 12v electric system
2. Upgrade to heavy-duty type air fitler2. Explosion-proof charging alternator
3. N/A3. Upgrading to specified brand and speicifications of charging alternator
Exhuast System1. Can modify installation position and direction of turbochargerLubricating System1. Oil Pan position
2. Water-cooled exhuast manifold2. Number of dipstick
3. Water-cooled turbocharger3. Position of dipstick can choose from 6 positions
4. N/A4. Can modify oil filter to be remote installation
Fuel System1. Upgrade to fuel fitler that integrated with fuel transfer pump and fuel pre-hearterStarting System1. 12V starter motor for 12v electric system
2. N/A2. Upgrading to specified brand and speicifications of starter motor
Engine Shut-Down System1. 12V solenoid for 12v electric systemPower Output System1. Can modify size of flywheel housing and flywheel.
2. Explosion-proof solenoid2. Dual-ear flywheel housing (For twin-starter system)
3. N/A3. Some of models can modify flywheel housing into PTO integrated type.
4. N/A4. Engine have connecting port of PTOs, that able to provide power output.
Cooling System1. Can modify engine into keel cooling systemEngine Mounting System1. Can modify engine mouting bracket.
Engine Auiliary Accessories1. Additional auxiliary systems can be added for special applications.
——END——

Note: All Above Data are Just for Referenece, All Data Might Change Without Notices or Update, Please Contact Our Sales Team to Confirm All Details Via WhatsApp or Email.

WhatsApp Online logo

Sales Team


Generator Engine - Mr. Haden Wu

Marine Engine - Mrs. Hailey Tang

Automotive Engine - Mr. Vin Hu

Industrial Engine - Miss. Bella Huang

Pump Engine - Miss. Zora Zhou

Sales Director - Mr. Jasper Lee      

Service Team


Technical Service - Mr. Vin Hu

Customer Service - Mrs. Wendy Fu

Contact EMAC Now!

10 + 10 =

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from www.dcec-engine.com

You have Successfully Subscribed!

Pin It on Pinterest